Washing Clothes Using The Cycle Selector; Pause Option; When The Cycle Is Finished - Samsung WF8604GEA User Manual

Washing clothes using the cycle selector

Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Control"
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Turn on your sink's water tap.
2. Press the Power(
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
Pre-wash is only available when selecting the Cotton( ), Synthetics( ), Denim( ), Sports
Wear( ), Baby Care( ), Dark Garment( ) and Daily Wash(
your clothing is heavily soiled.
7. Use the Cycle Selector to select the appropriate cycle according to the type of material:
Cotton( ), Synthetics( ), Denim( ),Silk&Lace( ), Sports Wear( ), Wool( ), Handwash( )
, Baby Care( ), Dark Garment( ), Daily Wash(
illuminate on the control panel.
8. At this time, you can control the wash temperature, the amount of rinses, the spinning
speed, and the delay time by pressing the appropriate option button.
9. Press the Start/Pause(
up and the remaining time for the cycle will appear in the display.

Pause Option

Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1. Press the Start/Pause(
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2. After closing the door, press the Start/Pause(
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the door.
2. Remove laundry.
WF8604SE-02612C_EN.indd 21
) button.
) button and the wash will begin. The process indicator will light
) button to unlock the door.
) cycles. It is only necessary if
), Quick 29'( ). The relevant indicators will
) button to restart the wash.
washing a load of laundry _21
2009-02-05 ¿ÀÀü 9:48:34