Washing Clothes Using The Cycle Selector - Samsung WW80H5400E Series User Manual

washing a load of laundry

Washing clothes using the cycle selector

Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Control"
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Turn on your sink's water tap.
2. Press the power( ) button.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
Pre-wash is only available when selecting the COTTON,
BEDDING, SUPER ECO WASH,BABY CARE, DAILY WASH, DARK GARMENT, STAIN
AWAY cycles. It is only necessary if your clothing is heavily soiled.
7. Use the cycle selector to select the appropriate cycle according to the type of material:
COTTON,
CARE, BABY CARE, DELICATES, DAILY WASH, DARK GARMENT, STAIN AWAY. The relevant
indicators will illuminate on the control panel.
8. At this time, you can control the wash temperature, the amount of rinses, the spinning
speed, and the delay time by pressing the appropriate option button.
9. Press the start/pause( ) button and the wash will begin. The process indicator will light up
and the remaining time for the cycle will appear in the display.
pause option
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1. Press the start/pause( ) button to unlock the door.
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2. After closing the door, press the start/pause( ) button to restart the wash.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the door.
2. Remove laundry.
WW80H5400EW-03409M_EN.indd 26
COTTON, SYNTHETICS, BEDDING, WOOL, SUPER ECO WASH, OUTDOOR
English - 26
COTTON, SYNTHETICS,
2014/10/14 13:43:52