[Approx.] Hours - Makita G1700I Instructions For Use Manual

Periodic Maintenance Schedule table
Maintenance Items
Clean generator and check bolt and nuts
Check and refill engine oil
Change engine oil (*Note1)
Clean spark plug
Clean air cleaner
Replace air cleaner element
Clean fuel filter
Clean and adjust spark plug and electrodes
Replace spark plug
Clean spark arrester
Remove carbon from cylinder head (*Note 2)
Check and adjust valve clearance (*Note 2)
Clean and adjust carburetor (*Note 2)
Replace fuel lines
Overhaul engine (*Note 2)
Check AC receptacles
Check DC termianl
Check engine switch
Check rotor
Check stator
Replace engine mount
*Note: 1. Initial oil change should be performed after first twenty (20) hours of operation. Thereafter
change oil every hundred (100) hours.
Before changing oil, check for a suitable way to dispose of old oil.
Do not pour it down into sewage drains, onto garden soil or into open streams. Your local zoning
or environmental regulations will give you more detailed instructions on proper disposal.
*Note: 2. As to the procedures for these items, please refer to the SERVICE MANUAL or consult your
nearest Makita service dealer.
Every Every
8 hours 50 hours
(Daily) (Weekly)
(Daily)
(Refill daily up to upper level)
(Initial (Every
20 hours) 100 hours)
(Every 100 hours)
(Daily)
(Daily)
(Daily)
Every Every
200 hours 500
(Monthly) hours
Every
1000
hours
(Yearly)
13