Installing The Kit; Car Stereo With Iso Connectors - Parrot MKi9000 User Manual

Installing the kit

Note : If you have the possibility to use a multimeter, test and verify all connections on the vehicle
before connecting the Parrot MKi9200 wiring loom.

Car stereo with ISO connectors

1. Connect the male connectors of the hands-free kit to the car stereo.
2. Join the vehicle‟s audio and power supply cables to the female connectors of the Parrot
MKi9000.
3. On the installation cable, connect the free yellow wire to one of the audio system‟s
corresponding mute-in jacks if available (mute in 1, mute in 2 or mute in 3).
Note : Mute in 1, mute in 2 and mute in 3 are only suggested mute locations. You first have to test
and verify the mute on the vehicle.
4