Installing the audio connectors ..................8 Installing the remote control ....................8 Installing the double microphone..................9 Installing the screen......................10 Using the Parrot MKi9100 for the 1st time ...............11 Navigating through the menus..................11 Customizing the Parrot MKi9100 ..................11 • Adjusting the volume....................11 •...
Page 3
Adjusting the ringtone volume ..................20 Activating the lateral noise detection ................20 Deactivating the Mute on Streaming.................20 Activating the equalizer.....................20 Activating the Virtual Super Bass effect................21 Activating the Repetition / Random options ..............21 Updating your Parrot MKi9100 ..................22 Hotline ..........................22 Parrot MKi9100 – User guide...
The user-independent voice recognition and voice synthesis are integrated in your Parrot MKi9100, which dramatically ease the way of using them in every situation. And all the connectors for any type of music are provided: iPod, iPhone, iTouch, USB keys, USB MP3 players, Bluetooth Stereo devices, CD players, MiniDisc…...
Installing the Parrot MKi9100 We advise our customers to have the Parrot MKi9100 fitted by a professional. Remove the audio system from your vehicles dashboard to access the wiring harness. • The cables supplied with the kit feature ISO connectors and two pairs of line-out jacks.
On the installation cable, connect the free yellow wire to the • corresponding audio system’s mute-input if available (mute in 1, mute in 2 or mute in 3). Parrot MKi9100 – User guide...
+12V and the black wire to ground. Check that the orange wire is not connected to the constant +12V supply, as you could run down the vehicle’s battery. Parrot MKi9100 – User guide...
To perform the installation check, turn the ignition on then off once the • Checking the Parrot MKi9100 is installed: the message “Goodbye!” must be wiring displayed. If it is not the case, it is necessary to inverse the positions of the red •...
Installing the towards the user to pick up clear speech. The microphone should double microphone be installed near the front roof light cluster, in the centre of the vehicle with a clear path to the user. Parrot MKi9100 – User guide...
• approximately 2 hours to make sure the adhesive tape adheres well. Remember to remove your screen when leaving the vehicle to • avoid tempting any would-be thieves and to prevent prolonged exposure to sunlight. Parrot MKi9100 – User guide...
• Customizing the Adjusting the volume Parrot MKi9100 To adjust the volume of the Parrot MKi9100, press the jog wheel and select Settings > Audio > Menu Volume Use the jog wheel to adjust the desired volume then validate.
1. Make sure the Parrot MKi9100 is set so that it is visible by all Bluetooth ® devices. To do so, press the jog wheel and select Settings > Bluetooth >Visibility > Visible. The Parrot MKi9100 is visible by default.
Using the Voice Recognition function Before using your Parrot MKi9100 voice recognition function, you first have to connect it with your phone / PDA. Refer to the Pairing and Connecting a phone via Bluetooth section for more information. Making a call via...
To use the magic words, you must activate them. To do so : 1. Press the jog wheel and select Settings > Magic words. 2. Press the jog wheel to activate/deactivate the magic words. Parrot MKi9100 – User guide...
Using the telephony function Before using your Parrot MKi9100 telephony function, you first have to connect it with your phone / PDA. Refer to the Pairing and Connecting a phone via Bluetooth section for more information. An incoming call is indicated by a ringtone.
• Press the same button to activate it again. The Parrot MKi9100 allows you to manage two calls simultaneously if Answering a your phone supports this functionality. For further information, refer to second call the user guide of your phone.
2. Use the jog wheel to select your DTMF between the following possibilities : 0,1,2,3,4,5,6,7,8,9,# or *. 3. Press the jog wheel to send this DTMF to your phone. During a call, use the jog wheel on the Parrot MKi9100 or adjust the Adjusting the volume directly on your phone.
When playing a music file, press the buttons to change to the previous or next track by pressing the respectively. The Next/Previous tracks functions are not available if the Parrot MKi9100 is connected to the audio player via the Jack connector. Parrot MKi9100 – User guide...
• Adjusting the volume When playing a music file, use the jog wheel to adjust the volume. The volume for calls and the volume for the streaming audio function work separately. Parrot MKi9100 – User guide...
Settings > Audio > Ringtone volume ringtone volume then use the jog wheel to adjust the volume. • The lateral noise detection of the Parrot MKi9100 allows you to Activating the adjust automatically the volume depending on the surrounding lateral noise noise.
• the jog wheel and select Audio effects > Settings > repetition then select Activated or Deactivated..Hold down the button for 2 seconds to access the audio effects menu during playback. Parrot MKi9100 – User guide...
Updating your Parrot MKi9100 A detailed procedure which explains step by step the update process of your Parrot MKi9100 is available on our website www.parrot.com. Hotline Our hotline is at your disposal from Monday to Friday, between 9 am and 6 pm (GMT +1) by mail hot-line@parrot.com...