Common Service Commands And Navigation Commands - Panasonic KX-TVM200 Operating Instructions Manual

Subscriber's Manual
2.6 Common Service
Commands and
Navigation Commands
Commands for Changing the
Current VPS Service
After going off-hook and dialling an
extension number of the VPS, you can
enter a service command to access
certain VPS features quickly. While VPS
guidance is being provided, you can also
use service commands to, for example,
switch to a different VPS service mode.
Some of the more commonly used
commands are listed below. For a
complete list, see Appendix.
# 2
6
#
16
Activates Custom Service.
You will be guided to enter
a Custom Service number
(1–100).
Activates Voice Mail
Service. You can record a
message for another
subscriber by entering his
or her mailbox number
when guided. You can also
log in to your mailbox by
entering this command
followed by your mailbox
number.
Activates Automated
8
#
Attendant Service. You
can call an extension by
dialling the desired
extension number when
guided. If the called party
does not answer, the VPS
can offer you other
options, such as leaving a
message, calling the
operator, etc. Note that
these options are available
only when calling the
extension via Automated
Attendant Service, i.e.
after you have entered this
service command.
Prompts-only Commands
The following commands can be used to
help you navigate through VPS menus.
Takes you back to the
previous menu.
Repeats the current menu.
0
Takes you back to the
# 7
Main Menu.
VM Menu-only Command
Switches you to the Main
# #
Menu (top menu) of the
prompts.