Table of Contents
Advertisement
TG6511-6521FX(e).book Page 16 Wednesday, February 24, 2010 1:41 PM
Getting Started
Initial settings
Symbol meaning:
Example: {V}/{^}: "Off"
Press {V} or {^} to select the words
in quotations.
Region settings
You can set the unit to use settings that
match your country (page 29). The
display language and other settings will
change accordingly.
Note:
L The display language only changes
(to the selected country's default
setting) for the handset used to select
the region setting. You must change
the display language for all other
handsets separately.
Display language
Important:
L When the language selection is
displayed after installing the
batteries for the first time, perform
step 2.
16 display languages are available.
1
8 i {#}{1}{1}{0}
2
{V}/{^}: Select your desired
language. i M i {ic}
16
Dialling mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is "Tone".
"Tone": For tone dial service.
"Pulse": For rotary/pulse dial service.
1
8 i {#}{1}{2}{0}
2
{V}/{^}: Select the desired setting.
i M i {ic}
Date and time
1
8 i {#}{1}{0}{1}
2
Enter the current date, month, and
year. i M
Example: 15 July, 2010
{1}{5} {0}{7} {1}{0}
3
Enter the current hour and minute.
Example: 9:30
{0}{9} {3}{0}
L You can select 24-hour or 12-hour
clock format ("AM" or "PM") by
pressing /.
4
M i {ic}
Note:
L To correct a digit, press {<} or {>} to
move the cursor to the digit, then
make the correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
One touch eco mode
When the handset is on the base unit,
the base unit transmission power is
reduced up to 99.9% if only one handset
is registered.
Even when the handset is not on the
base unit or several handsets are
registered, the base unit transmission
power in standby mode can be reduced
Advertisement
Table of Contents
