Panasonic KXTG2512E Operating Instructions Manual page 37

TG251x_2xE(e).book Page 37 Monday, January 25, 2010 3:09 PM
Problem
I cannot remember the PIN.
Battery recharge
Problem
The handset beeps and/or
7 flashes.
I fully charged the batteries, but
– 7 still flashes or
– the operating time seems to
be shorter.
The handset display is blank.
Making/answering calls, intercom
Problem
w is flashing.
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Useful Information
Cause/solution
L Change the PIN using the following method.
1
{j/OK}
2
{V}/{^}: "Base Unit Setup" i
{j/OK}
3
{V}/{^}: "Base Unit PIN" i
{j/OK}
4
{*}{7}{0}{0}{0}
5
Enter the new 4-digit base unit PIN. i
{j/OK} i {ic}
Cause/solution
L Battery charge is low. Fully charge the
batteries (page 11).
L Clean the battery ends (S, T) and the
charge contacts with a dry cloth and charge
again.
L It is time to replace the batteries (page 11).
L The handset is not turned on. Turn the power
on (page 14).
Cause/solution
L The handset is too far from the base unit.
Move closer.
L The base unit's AC adaptor is not properly
connected. Reconnect AC adaptor to the
base unit.
L The handset is not registered to the base unit.
Register it (page 40).
L Activating one touch eco mode reduces the
range of the base unit in standby mode. If
required, turn eco mode off (page 15).
37