Advertisement
Moulinex service centre (see list in service
booklet).
- Do not use the appliance for juicing if the
filter holder on the juice extractor is
damaged.
- For your own safety, use only Moulinex
accessories and spare parts which are
suitable for your appliance.
- Always use the pushers to push food down
the feeder tubes, never use your fingers, a
fork, a spoon, a knife or other utensil.
- Only remove the accessories when the
appliance has come to a complete stop.
- Do not introduce any utensil (spoon,
spatula...) through the feeder tube.
- Do not place any utensil containing metal in
a microwave oven.
- Use the accessories one at a time.
- Handle the metal blade and discs with great
care: they are extremely sharp.
- You must remove the blades (D) and
spindle (C) before emptying the bowl of its
content.
- Empty the chopping bowl or liquidiser jug
before detaching the handle.
- Never touch the parts when they are moving.
- Do not run your appliance empty.
- Do not allow long hair, scarves, ties etc. to
dangle over accessories during operation.
- Never use or plug in your appliance if :
- Its power cord is faulty or damaged.
- The appliance has been dropped.
- It has visible damage or operating faults.
In such cases, to avoid any danger, contact
your Approved Service Centre to have the
appliance repaired, as special tools are
required.
Using your appliance
- Before using for the first time, wash all
accessory parts in warm, soapy water. Rinse
and dry.
- Place the motor unit on a flat, clean and dry
surface.
- Plug the appliance in.
- Vari Pulse (intermittent operation): turn
switch (A6) to the "Vari Pulse" position «0».
Using a succession of pulses can give you
better control when preparing certain foods.
- Continuous operation: turn switch (A6) to
position "1".
- Stop: turn switch (A6) to position "0".
- Speed selector (A5): select the suggested
speed or change it as required during
preparation.
- Before using the liquidiser drive (A2):
ensure that there is no accessory fitted on
the bowl and drive accessory.
Functions of your food
processor
1
FITTING DETACHABLE PARTS
. A
/
SSEMBLING
DISMANTLING THE BOWL
The bowl is used with the following accessories
(depending on model):
- blades (D), grating/slicing discs (E), whisk
(F), emulsifying disc (G), citrus press (H),
juice extractor (J), "Maxipress" (L).
- If not already fitted,
- position drive (B3a) in the bowl.
- Lock the drive (B3a) with the nut (B3b) as
far as it will go.
- Dismantle the bowl assembly and clean it
after each use.
. F
/
ITTING
DETACHING THE BOWL HANDLE
AND THE LIQUIDISER JUG HANDLE
For ease of cleaning and storage, the bowl
handle (B4) and liquidiser jug handle (I4) are
detachable.
- To fit the handle, position it against the lugs
of the bowl/jug.
- Slide the handle upwards until it clicks.
- To detach the handle, press the release
button (B4a) or (I4a) and slide the handle
downwards.
(note: the lid of the liquidiser jug must be
unlocked in order to be able to detach the
handle (I4).)
The handle (B4) must be fitted to the bowl
in order to be able to lock the liquidiser
drive cover (A1).
M I X I N G / B L E N D I N G / C H O P P I N G /
2
KNEADING
A
CCESSORIES USED
- Bowl assembly (B), spindle (C) and
blades (D):
. metal blade (D1) for mixing or chopping.
. plastic kneading blade (D2) for kneading,
blending pastry or cake making.
F
ITTING THE ACCESSORIES
Press the release button (A4) to open the
upper power outlet cover (A1).
- Fit the bowl (B3) on the bowl and accessory
drive (A3).
- Fit the spindle (C) on to the bowl drive (B3a).
15
(B3)
(B4)
(I4)
(
DEPENDING ON MODEL
)
Advertisement
