Advertisement
- Put the ingredients in the bowl (K2 or M2),
and lock the lid (K1 or M1) on the bowl.
- Fit the accessory on the liquidiser drive (A2)
(audible click).
If the lid is not fitted or incorrectly fitted, the
appliance will not start.
U
SAGE AND PRACTICAL TIPS
- Select speed 5 (A5) and turn the switch (A6)
to position "1" to start the appliance or, for
better control over the chopping, use the
"Vari Pulse" position (A6).
With the mini-chopper you can:
. chop in seconds: garlic cloves, herbs,
parsley, dried fruits, bread, ham,...
. prepare baby foods.
Maximum quantity of dried foods (hazelnuts,
almonds...): 80 g.
This mini-chopper is not designed to take hard
ingredients such as coffee beans.
With the grinder you can:
. grind in seconds: coriander, pepper,
Cayenne pepper, dried apricots...
. Quantity / Maximum time for dried apricots:
140 g / 10 sec.
To remove the accessory from the appliance,
press the release button (A4).
9
P U R E E I N G / P R E S S I N G / M A S H I N G
(depending on model)
A
CCESSORIES USED
- Bowl assembly (B), spindle (C), and
"Maxipress" (L)
F
ITTING THE ACCESSORY
Press the release button (A4) to open the
liquidiser drive cover (A1).
- Fit the bowl (B3) on the accessory drive (A3).
- Fit the spindle (C) on the bowl drive (B3).
- Slide the required grid (L2) onto the spindle
(C), turning slightly so that the notches on
the grid come up against the ridges on the
inside of the bowl.
- Fit the blade unit (L1) in the central hole in
the grid (L2) and press down until it clicks.
- Place the lid (B2) on the bowl.
- Close the liquidiser drive cover (A1). You
should hear a click.
U
SAGE AND PRACTICAL TIPS
- Chop the food into chunks before processing.
- Select speed 1 (A5) and turn the switch (A6)
to start the appliance.
Selecting the grid:
. Large holes: for purées (up to 1 kg of cooked
vegetables or fruit) - potatoes, carrots,
cauliflower.
. Small holes: for coulis or compotes of fruit
(up to 500 g) with hard stones removed -
tomatoes, grapes, strawberries, raspberries,
redcurrants, apricots, peaches.
Note: if the blade unit fails to crush the food,
check that it is properly clipped into the grid.
CLEANING AND DISASSEMBLING THE
10
"MAXIPRESS"
- Lift out the assembly of spindle / blade unit
(L1) / grid (L2) by grasping the spindle (C).
- Remove the grid / blade unit assembly from
the spindle (C).
- Press on the clips on either side of the blade
unit to release it from the grid.
Cleaning
- Unplug the appliance.
- To make cleaning easier, rinse the
accessories straight after use.
- Wash and dry the accessories (they are all
dishwasher safe except for the whisk drive
(F1)).
- Pour some hot water containing a few drops
of washing up liquid into the mixer bowl.
Close the lid. Operate in short bursts by
pressing the pulse key several times. Unplug
the appliance. Rinse the bowl under running
water and leave to dry.
- For ease of cleaning and storage, the
chopping bowl handle (B4) and the liquidiser
jug handle (I4) are detachable (and dish
washer proof).
- If the accessories have become discoloured
by food (carrots, oranges...), rub them gently
with a cloth dipped in cooking oil and then
wash as normal.
- Do not place the motor unit (A) or the whisk
drive (F1) in water or near running water.
Wipe them with a damp cloth.
- The blades on the accessories are very
sharp. Always handle with care.
Storage
Your Odacio food processor has:
- a storage basket (O) that fits inside the bowl
assembly (B). You can store the grating/
slicing discs (E2), the disc holder (E1), the
metal blade (D1) as well as the spindle (C).
- a cable tidy incorporated in the motor unit:
stow the supply flex and adjust it to the
required length by pushing it into or pulling it
out of the base.
18
Advertisement
