Receiving A Message - Panasonic KX-TG8151FX Operating Instructions Manual

SMS (Short Message Service)
MFN ( ) a MbN: Select the party. a
2 times
To use the phonebook:
a MbN: Select the phonebook
entry. a 2 times
5
To save the message, select "Yes". a
6
To send the message, press
R To cancel sending, press M
Note:
R This unit supports SMS messages of up to
612 characters, however, the maximum
number of characters you can send or
receive may be limited by your SMS service
provider/telephone company. Contact your
SMS service provider/telephone company
for details.
R If your message contains over 160
characters, the message is a long message
and "IILong TextII" is displayed. Your
service provider/telephone company may
treat long messages differently from other
messages. Contact your service provider/
telephone company for details.
R If your phone is connected to a PBX, store
the PBX line access number (page 41).
Editing/sending a saved message
1
(middle soft key) a
2
MbN: "Send List" a
3
To read a saved message, press MCN or
MDN to select the message. a
4
To edit the message:
a MbN: "Edit Message" a
a Continue from step 3, "Writing and
sending a new message", page 39.
To send the message:
a MbN: "Send" a
and hold to erase all numbers. a
Continue from step 4, "Writing and
sending a new message", page 39.
Erasing saved messages
1
(middle soft key) a
40
TG8151_61FX(en)_0323_ver011.pdf
2
MbN: "Send List" a
3
MbN: Select a message. a
4
R To erase all messages, select "Erase
5
MbN: "Yes" a
.
N.

Receiving a message

When an SMS message is received:
– "Receiving SMS Message" is displayed.
– a tone is heard (if the handset ringer is
turned on).
–
new (unread) SMS messages.
Reading a received message
1
2
MbN: "Receive List" a
3
MbN: Select a message.
R Messages which have already been
R To erase a message, press
4
Press
a
Note:
R To call the message sender, press M
Using the smart function key
When the
function indicator flashes slowly, there are new
SMS messages.
Press MSmart functionN in step 1 on "Reading
a received message", page 40.
a Press
R "New SMS" must be set to "On" in Top key
setup (page 16).
R When the unit has new messages
SMS messages, and missed calls, the unit
can be operated to play the new messages
first, show the new SMS messages next,
and then show the missed calls.
a
*1 KX-TG8161 series: page 3
40
a MbN: "Erase" a
All". a
a M
is displayed with the total number of
(middle soft key) a
read are indicated by a " ", even if
they were read using another handset.
MbN: "Yes" a
to read the message content.
is displayed and the smart
2012/03/23 16:35:22
N
a
. a
N.
*1
, new