One Touch Eco Mode; Display Mode - Panasonic KX-TG8151FX Operating Instructions Manual

or charger, battery consumption is faster
than usual.

One touch eco mode

When the handset is on the base unit, the
base unit transmission power is reduced up to
99.9 % if only one handset is registered. Even
when the handset is not on the base unit or
several handsets are registered, the base unit
transmission power in standby mode can be
reduced up to 90 % by activating one touch
eco mode.
You can turn on/off one touch eco mode by
just pressing MR/ECON. The default setting is
"Normal".
– When the one touch eco mode is on: "Low"
is temporarily displayed and
on the handset display instead of
– When the one touch eco mode is off:
"Normal" is temporarily displayed and
goes off from the handset display.
Note:
R When there is another cordless phone
nearby and it is in use, the base unit
transmission power may not be reduced.
R Activating one touch eco mode reduces the
range of the base unit in standby mode.
R If you set the repeater mode to "On" (page
36):
– One touch eco mode is cancelled.
– "Eco Setup" is not shown in the
display menu (page 28).

Display mode

You can select to display either a single item
or multiple items on one screen at a time for
the following features:
– handset main menu icons in function menu
– menu list, recorded message list
phonebook list, caller list, and redial list
*1 KX-TG8161 series: page 3
Select the desired setting:
– "Multi Items": Multiple entries/all menu
icons are shown on one screen at a time.
TG8151_61FX(en)_0323_ver011.pdf
– "Single Item": An entry/a menu icon is
shown on one screen in large characters at
a time.
The default setting is "Multi Items".
Using soft key (Temporarily
switching the display mode)
You can temporarily switch the display mode
by pressing
lists or selecting menu icons.
Programming the display mode
beforehand
1
2
MbN: Select the desired setting. a
a M
is shown
. Note:
R When in multiple items display mode, you
can move screens by pressing MEN or MFN,
without scrolling down or up through the list:
– Press MEN to go to the next screen.
– Press MFN to return to the previous
R When in multiple items display mode, you
can switch the screen to confirm the
detailed information by pressing
*1
,
17
Getting Started
shown when viewing the
(middle soft key) #192
N
screen.
2012/03/23 16:35:19
.
17