Smart Function Key (Top Key); Dialling Mode - Panasonic KX-TG8151FX Operating Instructions Manual

Getting Started
Note:
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again.

Dialling mode

If you cannot make calls, change this setting
according to your telephone line service. The
default setting is "Tone".
"Tone": For tone dial service.
"Pulse": For rotary/pulse dial service.
1
(middle soft key) #120
2
MbN: Select the desired setting.
3
a M N
Smart function key (Top
Key)
The smart function key (Top Key) is located
on the top of the handset and informs you with
its flashing to allow you to activate the
following features by simply pressing this key.
n When the smart function indicator
flashes rapidly, you can:
– Answer the call (outside call, intercom).
(page 18, 48)
– Stop the alarm sound. (page 32)
– Stop paging. (page 48)
n When the smart function indicator
flashes slowly in standby mode, you can:
– Listen to new messages.
– Read new SMS messages. (page 40)
– View the caller list when there are
missed calls. (page 38)
To activate these features, their Top key
setup must be "On". (page 16)
*1 KX-TG8161 series: page 3
Using the smart function key
(Top Key)
When the smart function indicator flashes
rapidly/slowly, press MSmart functionN.
R The above features can be activated
depending the situation.
16
TG8151_61FX(en)_0323_ver011.pdf
R If you answer a call using the smart
function key, the speakerphone is activated.
R Even if the handset is placed on the base
unit or charger, the feature can be
activated. You can talk or listen to new
messages
you want to perform further operations, lift
up the handset.
R When the unit has new messages
SMS messages, and missed calls, the unit
can be operated to play the new messages
first, show the new SMS messages next,
and then show the missed calls.
*1 KX-TG8161 series: page 3
Note:
R While key lock is on (page 20), incoming
calls can be answered, but the following
features are disabled even when the smart
function indicator flashes slowly.
– Listen to new messages.
– Read new SMS messages. (page 40)
– View the caller list when there are
*1 KX-TG8161 series: page 3
Setting the smart function key (Top
Key Setup)
The Top key setup for the following features
must be "On".
– "New Message"
– "New SMS" (Default: On)
– "Missed Call" (Default: Off)
The settings can be set for each handset.
*1 KX-TG8161 series: page 3
*1
(page 44)
1
2
MbN: Select the desired setting and press
R " " is displayed next to the selected
R To cancel a selected feature, press
3
Note:
R If the smart function indicator flashes when
the handset is not placed on the base unit
16
*1
without lifting up the handset. If
*1
missed calls. (page 38)
*1
(Default: On)
(middle soft key) #278
.
features.
again. " " disappears.
a M N
2012/03/23 16:35:18
*1
, new
(page 44)