Table of Contents
Advertisement
Internet/WAP™
Your mobile allows WAP™(Wireless Appli-
cation Protocol) internet connections to
access operator and/or internet provided
services (e.g. news, sports, weather, travel
buying, etc.).
To get a WAP™ internet connection please
make sure:
• your SIM card bears a Data sub-
scription
• all parameters are stored into the
mobile. These parameters may
have been set by your operator. If
not you have to enter them man-
ually.
Please contact your service provider to
check these elements and get the detailed
list of parameters to be entered.
Storing the connection set-
tings
The current date and time must be set be-
fore you enter any WAP™ connection set-
ting (see 'Setting the Date and Time' on
the 'Getting started with your M320'
booklet).
The profile list can contain up to 10 inter-
net profiles. A profile is a WAP™ connec-
tion list of parameters. Each profile allows
access to a specific WAP™ gateway.
To enter and store the profile
details via the Assistant
Press
1
Select Internet profiles
2
3
Choose an empty profile ([...])
by selecting Assist
The Assistant feature allows easy entering
of the WAP™ parameters to access WAP™
servers. It displays the fields to be filled in
one after another.
54
. Select Internet.
.
4
Enter each parameter and vali-
date by selecting OK
There are 6 screen levels to be
filled in. The requested infor-
mation depends on connec-
tion type.
If you want to set a WAP™
(circuit) connection, please fill
in the following fields:
1/6 Profile name
2/6 Gateway IP Address
3/6
address): select List to get
and select one of the available
home page addresses or the
http://
addresses.
Select Circuit connection
4/6 Phone number
5/6 Login (Identification)
6/6 Password (for access
control)
If you want to set a GPRS con-
nection, please fill in
the following fields:
1/6 Profile name,
2/6 Gateway IP Address,
3/6
address)
Select Packets
4/6 Access point name
5/6 Login (identification)
6/6 Password (for access
control)
To enter and store the profile
details in standard mode
.
You can only register profile details via the
standard mode if you have previously reg-
istered profiles in the Connection manager
menu (see Connection manager, page 51):
Press
1
Select Internet profiles
2
Choose an empty profile ([...])
3
by selecting OK
4
Enter the profile name and
select OK
5
Select Settings
.
Home
page
(URL
and
https://
Home
page
(URL
.
. Select Internet.
.
.
.
root
.
.
Advertisement
Table of Contents
