Editing A Phonebook Or A Sim Name Card - Mitsubishi Electric M320 User Manual

Dual band gsm telephone
Table of Contents

Advertisement

Storing a received number
Numbers stored in the last dialled,
received, unanswered call infor-
mation and SMS message loca-
tions can also be stored into the
phonebook:
1
With a received call, unanswe-
red call or SMS message select
Options
2
Scroll down and select
Numbers
contained in an SMS. The mes-
sage number(s) is/are dis-
played. Choose one if several
numbers are available.
Select Store
2'
the above mentioned proce-
dure to create a phone name
or a SIM name card.
4
1. While entering a number selecting Clear once dele-
tes the last character. Holding the Clear key deletes
the whole number.
2. The *, +, P (pause), # and _ characters can be
stored as part of numbers.
3. You can use _ (wild card spaces) to store numbers.
When calling a number bearing wild card spaces
select the number from the phonebook, press Ok and
type the number corresponding to the wild card spaces
(=missing figures).
4. If the SIM card or phone memory are full a warning
message is displayed on phonebook selection.
Editing a Phonebook or a
SIM name card
From the standby display:
1
Press
to get to the phone-
book.
2
Scroll down to the card you
want to reach and select
OK
.
.
if the number is
then follow
3
Scroll down to the field(s) you
want to modify and amend it/
them. Select Save
store the changes.
Via the menu:
. Select Phone
Press
1
Book.
2
Select Read
3
Select one of the stored cards.
4
Select Options
5
Select View
6
Scroll down to the field(s) you
want to modify and amend it/
them. Select Save
store the changes.
When modifying a card you can
create a voice dialling pattern (see
Voice dialling page 18). The voice
dialling pattern can only be re-
corded in edition mode.
Recording a Voice dialling pat-
tern:
1
Press
to get to the phone-
book.
2
Scroll down to the card you
want to reach and select
OK
or select Options
then select View
Scroll down to the Voice
3
dialling field and select
OK
. Select New
record the voice pattern or
Record
is already recorded and you
want to change it.
Repeat the name until it is
stored (minimum = twice).
Pronounce it as clearly as pos-
sible and in a quiet environ-
ment.
When the voice patterns
match, Stored is displayed.
to
.
.
.
to
.
to
if a voice pattern
15

Advertisement

Table of Contents
loading

Table of Contents