Table of Contents
Advertisement
1
Disconnect the power cord and the telephone line
cord.
2
Open the front cover (A), push the green button
(B), then open the back cover (C).
C
A
3
Clean the document feeder rollers (D) and rubber
flap (E) with a cloth moistened with isopropyl rubbing
alcohol, and let all parts dry thoroughly. Clean the
scanner glass (F) with a soft, dry cloth.
Caution:
R Do not use paper products, such as paper
towels or tissues.
E
D
F
D
4
Clean the recording paper feeder roller (G) with a
cloth moistened with isopropyl rubbing alcohol, and
let all parts dry thoroughly.
B
5
Close the back cover securely by pushing down on
the dotted area at both ends (H), then close the front
cover securely (I).
6
Install the paper tray (page 14), then insert the
recording paper gently (page 14).
7
Connect the power cord and the telephone line cord.
11.4 Thermal head cleaning
If smudges or black/white lines appear on a copied/
received document, check whether there is dust on the
thermal head. Clean the thermal head to remove the
dust.
11. Maintenance
I
G
H
63
Advertisement
Table of Contents
