Table of Contents
Advertisement
4.1 Sending a fax manually
1
Adjust the width of the document guides to fit the
actual size of the document.
2
Insert the document (up to 10 pages) FACE DOWN
until a single beep is heard and the unit grasps the
document.
3
If necessary, press MJN or MKN repeatedly to select
the desired resolution.
4
KX-FC278:
Lift the handset or press MSP-PHONEN.
KX-FC268:
MSP-PHONEN
5
Dial the fax number.
6
When a fax tone is heard:
Press MFAX STARTN.
When the other party answers your call:
Ask them to press their start button. When the fax
tone is heard, press MFAX STARTN.
To select the resolution
Select the desired resolution according to the character
size.
– "STANDARD": For normal-sized characters.
– "FINE": For small-sized characters.
– "SUPER FINE": For very small-sized characters.
– "PHOTO": For photographs, shaded drawings, etc.
R Using the "FINE", "SUPER FINE" and "PHOTO"
settings will increase transmission time.
To redial the last number
MREDIALN A MFAX STARTN
R If the line is busy, the unit will automatically redial the
number 2 or more times.
R To cancel redialling, press MSTOPN.
To send more than 10 pages at a time
Insert the first 10 pages of the document. Add the other
pages (up to 10 at a time) on top of the previously
inserted pages while the last page is being fed into the
unit.
Pre-dialling a fax number
1. Enter the fax number.
2. Insert the document.
3. MFAX STARTN
Sending from memory (Quick scan feature)
To use this feature, activate feature #34 (page 41)
beforehand.
1. Insert the document.
2. Enter the fax number. A MFAX STARTN
R If the document exceeds the memory capacity,
transmission will be cancelled and this feature will be
turned OFF automatically. You must send the entire
document manually.
R This feature cannot be used if the handset is being
used (KX-FC278 only), or if MSP-PHONEN on the
base unit, M
N or M N on the cordless handset is
pressed.
To stop sending
Press MSTOPN.
To send a fax using the cordless handset
1. While talking to the other party, insert the document,
then press
.
2. Select "Fax Start", then press
Printing a sending report
A sending report provides you with a printed record of
transmission results (errors, etc.). To print the sending
reports, make sure that feature #04 is activated
(page 39). The default setting is "ERROR". For an
explanation of the messages, see page 52.
Printing a journal report
A journal report provides you with a printed record of the
30 most recent fax transmissions and receptions. To
print it manually, see page 65. To print it automatically
after every 30 new fax transmissions and receptions,
make sure feature #22 is activated (page 40). For an
explanation of the messages, see page 52.
4.2 Document requirements
Minimum document size
128 mm in width, 128 mm in length
Maximum document size
216 mm in width, 600 mm in length
Effective scanning area
R Shaded area will be scanned.
4 mm
208 mm
216 mm
Document weight
R Single sheet:
2
2
45 g/m
to 90 g/m
R Multiple sheets:
2
2
60 g/m
to 80 g/m
4. Fax
.
2 mm
2 mm
4 mm
27
Advertisement
Table of Contents
