Table of Contents
Advertisement
TG2361JX.book 46 ページ ２００９年１２月１７日 木曜日 午前１１時５５分
Intercom
During an intercom call:
• If you have difficulty hearing while using the handset speakerphone and base
unit speaker, decrease the speaker volume by pressing VOLUME [ ] on the
base unit or [d] on the handset.
• If an incoming call is being received, you will hear two tones (incoming call
tone, page 53) and "
To answer the call;
— if using the handset, press [OFF], then [C] or [s].
— if using the base unit, press [SP-PHONE] twice.
Answering Intercom Calls
Handset
When a handset is paged, it rings and the Ringer/Message Alert indicator flashes
rapidly. The display shows the calling extension.
Press [C], [s] or [HOLD/INTERCOM].
1
• You can also answer a call by pressing any button
except [d], [B] or [OFF].
To disconnect the intercom, press [OFF].
2
• If the Auto Talk feature is turned on (p. 16), you can also answer a page by simply
lifting the handset off the base unit or charger.
Base Unit
When the base unit is being paged, it rings.
Press [SP-PHONE] or [LOCATOR/INTERCOM].
1
To disconnect the intercom, press [SP-PHONE] or [LOCATOR/
2
INTERCOM].
• When the ringer volume is turned off (p. 17, 18), the handset and the base unit
will ring at the low level for intercom calls.
• You cannot change the ringer tone for intercom calls.
• When the base unit user pages all handsets, only the handset user who
answers first can talk with the base unit user.
46
" will flash rapidly on the base unit.
LINE
IN USE
Ex. Base calling
Call from Base
Ex. Handset 2 calling
Call from HS[2]
Advertisement
Table of Contents
