Voice Enhancer Technology - Panasonic KX-TG2361JX Operating Instructions Manual

Dual handsets digital cordless answering system
Table of Contents

Advertisement

TG2361JX.book 27 ページ 2009年12月17日 木曜日 午前11時55分
To put a call on hold
Press [HOLD/INTERCOM] during a conversation.
1
• "Line on hold." is displayed.
• To transfer the call to the base unit or another handset, see pages 48– 49.
2
Press [HOLD/INTERCOM] again.
• "Hold" is displayed.
• You can search the Caller List or phone book while a call is on hold. To exit the
list, press [OFF]. The call will remain on hold.
To return to the call, press [C] or [s].
• The base unit user can also take the call by pressing [SP-PHONE].
• Another handset user can also take the call by pressing [C] or [s].
• If another phone is connected on the same line (p. 9), you can also take the call
by lifting its handset.
• If a call is kept on hold for 6 minutes, an alarm tone will start to sound and the
Ringer/Message Alert indicator will start to flash rapidly. After 4 additional minutes
on hold, the call will be disconnected.

Voice Enhancer Technology

Panasonic's Voice Enhancer Technology clarifies the voice of the person you are
talking to, reproducing a more natural-sounding voice that is easier to hear and
understand.
Voice Enhancer Technology can be turned on or off. The factory preset is OFF.
• Depending on the condition and quality of your telephone line, this feature may
emphasize existing line noise. If it becomes difficult to hear, turn this feature off.
To turn this feature on, press (VE) during a
conversation.
• "J" is displayed.
• To turn this feature off, press (VE) again.
"J" disappears from the display.
• After hanging up a call, the on/off setting will be retained.
When the handset is not in use, you can also turn this feature on or off by
programming as follows:
1. Press [MENU].
2. Scroll to "Voice enhancer" by pressing [d] or [B], then press Select.
3. Select "On" or "Off" by pressing [d] or [B].
4. Press Save, then press [OFF].
Backlit LCD display/Lighted handset keypad
The handset display and dialing buttons will light for a few seconds after pressing a
button or lifting the handset off the base unit or charger. They will also light when an
intercom/outside call is being received.
Making Calls
J
5
Talk
00-00-32
(VE)
Mute
K
L
27

Advertisement

Table of Contents
loading

Table of Contents