Installation Menu - Mitsubishi Electric XD520U User Manual

Menu operation (continued)

2. INSTALLATION menu

Menu option
OFF/BEIGE
BLUE
WALL SCREEN GREEN
BLACK BOARD/WHITE
BOARD
STANDARD
LAMP MODE
LOW
AUTO POWER ON ON/OFF
AUTO POWER OFF OFF/5-60 min
IMAGE CAPTURE
SPLASH SCREEN ON/OFF
BACK COLOR BLUE/BLACK/IMAGE
AV MUTE MODE BLACK/IMAGE
OFF
MIRROR
IMAGE REVERSE
INVERT
MIRROR INVERT
• By default, the LAMP MODE is set to STANDARD. The LAMP MODE is set to either STANDARD or LOW depending on the setting last selected,
and you cannot switch the LAMP MODE in about one minute after the lamp is on.
• You cannot select IMAGE CAPTURE SPLASH SCREEN when PASSWORD FUNCTION in the FEATURE menu is set to SPLASH ID SCREEN,
as the password lock is activated.
• When you keep projecting images with BACK COLOR or AV MUTE MODE set to IMAGE for an extended period of time, an afterimage may lin-
ger on the screen.
EN-18
Setting
/ LIGHT
Selects a desired setting based on the color of the screen or wall on
/ LIGHT
which images are projected. (See page 15.) When selecting a setting
/ PINK /
other than BLACK BOARD/WHITE BOARD, you can fine-tune the color
tone to the desired level on the 1 to 5 scale.
Select this setting when you want to view images in a well-lit room.
Select this setting when you want to view images at a moderate light
intensity. The operating sound is consequently reduced, and the lamp
lifetime becomes longer.
• When this mode is switched, projected images may flicker.
• If this mode is frequently switched, the lamp may be deteriorated.
When this mode is set to ON, the lamp is automatically lit when the
power cord is plugged in the wall outlet. Select ON when you set the
projector at the ceiling.
• When the lamp is off, the projector is in standby. Use the remote
control to turn on the lamp.
Selects a desired timer setting until the projector enters the standby
mode when there is no signal input from the source.
Use this menu to capture the screen for the splash screen.
Select ON to display the splash screen when the projector is powered on.
• You can edit the splash screen.
Selects the background color that is displayed when there is no signal
input from the source. When IMAGE is selected, the splash screen is
displayed.
Selects the background that is displayed when the AV MUTE button is
pressed. When IMAGE is selected, the splash screen is displayed.
Select this setting when you want to view images from the front with the
projector set on the floor.
Select this setting when you want to view images from behind the
screen with the projector set on the floor.
Select this setting when you want to view images from behind the
screen with the projector set at the ceiling.
Select this setting when you want to view images from the front with the
projector set at the ceiling.
Feature description
opt.
INSTALLATION
WALL SCREEN
BEIGE
LAMP MODE STANDARD
AUTO POWER
OFF
ON
AUTO POWER
OFF
OFF
IMAGE
GO
CAPTURE
SPLASH
ON
ON
SCREEN
BACK COLOR BLUE
MUTE MODE BLACK
IMAGE
OFF
REVERSE