Mitsubishi Electric XD520U User Manual page 24

Advanced features (continued)
5. Press the ENTER button.
• The screen for entering a password appears.
PASSWORD
CONFIRM
1
4 2
O K : ENTER
3
6. Enter a 4 - 8 digit password using the
the remote control as shown below.
( =1, =2, =3, =4)
7. Press the ENTER button.
• To cancel the procedure, press the MENU button.
8. Enter the password again for confirmation using the same steps.
9. Press the ENTER button.
• If the entered passwords are incorrect, an error message
appears.
• To cancel the procedure, press the MENU button.
To cancel the password function:
1. Display the FEATURE menu.
2. Press the or button to select PASSWORD FUNCTION.
3. Press the ENTER button.
• The screen for canceling the password function appears.
opt.
FEATURE
MENU ACCESS
LOCK OK
OK
UNLOCK
4. Press the ENTER button.
• The screen for entering the password appears.
PASSWORD
1
4 2
O K : ENTER
3
5. Enter a 4 - 8 digit password using the
the remote control as shown below.
( =1, =2, =3, =4)
6. Press the ENTER button.
• If you enter a wrong password, an error message appears.
• To cancel the procedure, press the MENU button.
Important:
• Disable the password function by holding down the MENU and
ENTER buttons on the control panel together for about three sec-
onds.
EN-24
CANCEL : MENU
, , or buttons on
CANCEL : MENU
, , or buttons on
Magnify
By pressing the MAGNIFY button on the remote control, you can mag-
nify the image to view the details.
• The MAGNIFY mode doesn't function with some input signals. For
details, see page 33.
• The MAGNIFY mode doesn't work with video or S-video signal.
MAGNIFY
Magnified image
To use the MAGNIFY mode:
1. Press the MAGNIFY button.
• You can select the area to be magnified by pressing the
, or button on the remote control.
• You can change the magnification of the selected area by
pressing the or
2. Press the MAGNIFY button again to exit the MAGNIFY mode.
• The regular operation screen will appear.
Important:
• In the MAGNIFY mode, you can't adjust the volume.
button.
,