Installation Menu - Mitsubishi Electric DLP XD700U User Manual

Menu operation (continued)

Installation menu

Efficient Mode
Menu Position
Image Reverse
Auto Power On
Auto Keystone
Test Pattern
Language
Reset All
ITEM SETTING
Efficient Mode OK
Lamp Mode Standard
Low
Standby Mode Low
LAN
Speaker Out
Monitor Out
Auto Power Off
Menu Position 5 options
Image Reverse Off
Mirror
Invert
Mirror Invert
Auto Power On Off / On
Auto Keystone Off / On
Test Pattern Cross Hatch
White
Black
Language 18 languages
Reset All OK
the projector is turned on. The Lamp Mode is set to either Standard or Low depending on the setting last selected, and you
cannot switch the Lamp Mode in about one minute after the lamp is on.
during standby mode. However, no audio is output when the last selected input was HDMI.
plugging the power cord (with 5 second high speed rotation at the beginning) and after turning off the lamp. This is to cool
down the projector operating various functions during standby and is not a malfunction. When Standby Mode is set to Low,
the fans stop during standby.
Installation
OK
Upper Left
Off
Off
Off
Cross Hatch
English
OK
Adjust MENU Exit
Select
FUNCTION
Displays the Efficient Mode menu for the following settings.
Select this option when you want to view images in a well-lit room.
Select to moderate the intensity of the lamp. The operating sound is reduced
and the lamp lifetime becomes longer.
Select this option when you don't use the LAN control, speaker output and
monitor output during power standby. This option disables them and reduces
the power consumption during the power standby.
Select this option when you control the projector via the LAN during power
standby.
Select this option when you want to output audio from the speaker during
power standby.
Select this option when you want to output video signal from the MONITOR
OUT terminal in addition to the audio from the speaker during power standby.
Selects a desired timer setting until the projector enters the standby mode
when there is no signal input from the source.
Use this setting to change the position of the menu on the screen.
Select this setting when you want to view images from the front with the
projector set on the floor.
Select this setting when you want to view images from behind the screen with
the projector set on the floor.
Select this setting when you want to view images from behind the screen with
the projector set at the ceiling.
Select this setting when you want to view images from the front with the
projector set at the ceiling.
When this mode is set to On, the lamp is automatically lit when the power
cord is plugged in the wall outlet. Select On when you set the projector at the
ceiling.
turn on the lamp.
Select Auto Keystone function.
Select to show the test cross hatch pattern.
Select to show the maximum brightness image.
Select to show the minimum brightness image.
Selects a desired language for the menu.
Resets all menu settings except for Password and Language to the default.
Efficient Mode
Lamp Mode
Standby Mode
Auto Power Off
Adjust
Select
EN-27
Standard
Low
5Min
MENU Exit