Installation Menu - Mitsubishi Electric DLP XD700U User Manual

Menu operation (continued)

Installation menu

Efficient Mode
Menu Position
Image Reverse
Auto Power On
Auto Keystone
Test Pattern
Reset All
ITEM
Efficient Mode
Lamp Mode
Standby Mode
Auto Power Off
Menu Position
Image Reverse
Auto Power On
Auto Keystone
Test Pattern
Language
Reset All
• You can display the Efficient Mode menu also by pressing the EFFICIENT MODE button.
• Regardless of the setting of Lamp Mode in the Installation menu, the Standard lamp mode is activated by default whenever
the projector is turned on. The Lamp Mode is set to either Standard or Low depending on the setting last selected, and you
cannot switch the Lamp Mode in about one minute after the lamp is on.
• When the Standby Mode is set to Speaker Out or Monitor Out, the audio selected with Audio Input in the Audio menu is output
during standby mode. However, no audio is output when the last selected input was HDMI.
• During standby mode, you cannot change the audio input and the volume from the speaker.
• When Standby Mode is set to LAN, Speaker Out, or Monitor Out, the fans rotate at very low speed during standby after
plugging the power cord (with 5 second high speed rotation at the beginning) and after turning off the lamp. This is to cool
down the projector operating various functions during standby and is not a malfunction. When Standby Mode is set to Low,
the fans stop during standby.
• To cancel the test pattern, press any button.
Installation
OK
Upper Left
Cross Hatch
Language English
OK
Adjust
MENU
Select
SETTING
OK
Standard
Low
Low
LAN
Speaker Out
Monitor Out
Off / 5-60 Min
5 options
Off
Mirror
Invert
Mirror Invert
Off / On
Off / On
Cross Hatch
White
Black
18 languages
OK
Lamp Mode
Standby Mode
Off
Auto Power Off
Off
Adjust
Off
Select
Exit
FUNCTION
Displays the Efficient Mode menu for the following settings.
Select this option when you want to view images in a well-lit room.
Select to moderate the intensity of the lamp. The operating sound is reduced
and the lamp lifetime becomes longer.
• When this mode is switched, projected images may flicker.
• If this mode is frequently switched, the lamp may be deteriorated.
Select this option when you don't use the LAN control, speaker output and
monitor output during power standby. This option disables them and reduces
the power consumption during the power standby.
Select this option when you control the projector via the LAN during power
standby.
Select this option when you want to output audio from the speaker during
power standby.
Select this option when you want to output video signal from the MONITOR
OUT terminal in addition to the audio from the speaker during power standby.
Selects a desired timer setting until the projector enters the standby mode
when there is no signal input from the source.
Use this setting to change the position of the menu on the screen.
Select this setting when you want to view images from the front with the
projector set on the floor.
Select this setting when you want to view images from behind the screen with
the projector set on the floor.
Select this setting when you want to view images from behind the screen with
the projector set at the ceiling.
Select this setting when you want to view images from the front with the
projector set at the ceiling.
When this mode is set to On, the lamp is automatically lit when the power
cord is plugged in the wall outlet. Select On when you set the projector at the
ceiling.
• When the lamp is off, the projector is in standby. Use the remote control to
turn on the lamp.
Select Auto Keystone function.
Select to show the test cross hatch pattern.
Select to show the maximum brightness image.
Select to show the minimum brightness image.
Selects a desired language for the menu.
Resets all menu settings except for Password and Language to the default.
EN-27
Efficient Mode
Standard
Low
5Min
Exit
MENU