Information Menu - Mitsubishi Electric XD520U User Manual

Menu operation (continued)
4. SINGAL menu
Menu option
HORIZ. POSITION 0-999
VERT. POSITION 0-999
FINE SYNC. 0-31
TRACKING 0-2800
AUTO
RGB
COMPUTER INPUT
YC C
B R
OVER SCAN 100%-90%
HOLD OFF / ON
USER
CLAMP POSITION 1-255
CLAMP WIDTH 1-63
VERT.SYNC AUTO / OFF
LPF ON / OFF
SHUTTER(U) 0-20
SHUTTER(L) 0-20
SHUTTER(LS) 0-20
SHUTTER(RS) 0-20
• Horizontal strips may appear in the enlarged projected image, though these conditions are not a malfunction.
• When you change the value of the horizontal or vertical position drastically, noise may appear.
• The adjustable range of the vertical position varies depending on the type of the input signal. The image may be stationary even when the value
is changed. These conditions are not a malfunction.
• SHUTTER does not work correctly during keystone adjustment.
• When you increase the value of OVER SCAN, noise may appear on the screen.
Important:
• You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is input.

5. INFORMATION menu

Menu option
This menu shows a lamp operating time (hour) calculated assuming that LAMP MODE is LOW.
•
•
LAMP TIME (LOW)
•
INPUT Indicates the name of the terminal to which the currently projected video signal is being input.
RESOLUTION Indicates the resolution of the currently projected video signal.
VERTICAL FREQUENCY Indicates the vertical frequency of the currently projected video signal.
HORIZONTAL FRE-
Indicates the horizontal frequency of the currently projected video signal.
QUENCY
SYNC. TYPE Indicates the type of the sync signal for the currently projected video signal.
EN-20
Setting
Select this setting to adjust the horizontal position of projected images.
Select this setting to adjust the vertical position of projected images.
Select this setting to eliminate flickering or blurs, if they appear, when
you are viewing projected images.
Select this setting to eliminate vertical wide stripes, if they appear, when
you are viewing projected images.
Automatically sets the appropriate setting.
Select this setting when you connect the projector to high definition
video equipment having R, G, and B output terminals.
Select this setting when you connect the projector to a DVD player or
/YP P other device having Y, C
B R
output terminals.
Use this setting to adjust the display area of projected images.
Use this setting to adjust projected images when flagging occurs in the
upper area of the screen.
Use this setting to correct solid white or solid black that appears in pro-
jected images
Use this setting to correct solid black that appears in projected images.
Use this setting to adjust projected images when the motion is not
smooth. Select AUTO for most cases.
Select this setting to enable or disable LPF.
Use this setting to adjust projected images when noise appears in the
top part of the image.
Use this setting to adjust projected images when noise appears in the
bottom part of the image.
Use this setting to adjust projected images when noise appears in the
left half of the image.
Use this setting to adjust projected images when noise appears in the
right half of the image.
Feature description
When the LAMP MODE is STANDARD, this menu shows a longer lamp operating time than
the actual time. (See page 26 for the interval of lamp replacement.)
When the lamp operating time is 0 to 10 hours, "0H" is displayed. When the lamp operating
time exceeds 10 hours, the actual hours are displayed.
When the lamp operating time reaches 2250 hours, the bar turns yellow. When it reaches
2850 hours, the bar turns red.
(The lamp lifetime is 3000 hours.)
Feature description
, and C (or Y, P , and P ) component video
B R B R
opt.
SIGNAL
HORIZ. POSITION 0
VERT.POSITION 0
FINE SYNC. 0
TRACKING 0
COMPUTER
RGB
INPUT
R G B R G B
OVER SCAN 100%
HOLD OFF
USER OK
opt.
SIGNAL
USER
CLAMP
1
POSITION
CLAMP WIDTH 1
VERT. SYNC AUTO
?
LPF OFF
SHUTTER(U) 0
SHUTTER(L) 0
SHUTTER(LS) 0
SHUTTER(RS) 0
SIGNAL USER menu
opt.
INFORMATION
0 H
LAMP TIME (LOW)
INPUT
COMPUTER2
RESOLUTION
1024x768
VERTICAL
75.04 Hz
FREQUENCY
HORIZONTAL
60.02 KHz
FREQUENCY
R G B
SYNC. TYPE 5wire
H V