Table of Contents
Advertisement
SIZE
Sets the print area of the image. Choose from 3 preset print areas or a user
selectable area.
Picture element
W 1280X600 dot
M 1208X568 dot
N 1160X544 dot
USER
•
Part of the image may be clipped from the print depending on the print size.
COPY
Copy a printed image size which is set W, M, or N in size. The
selected setting level is displayed as TOP, BOTTOM, LEFT and
RIGHT. These levels become the changing base.
TOP/BOTTOM/LEFT/RIGHT
Sets the printing area of the image. Adjust the size with
button.
TOP
Shifts the upper end of the image (setting area : 0 to -63)
BOTTOM
Shifts the lower end of the image (setting area : 0 to -63)
LEFT
Shifts the left end of the image (setting area : 0 to -63)
RIGHT
Shifts the right end of the image (setting area : 0 to -63)
•
When monochrome signal is input, colours may not be added to the characters
displayed on the monitor. In that case, set SELECT of ANALOG COLOR ADJ MENU
to "B&W" in SERVICE MENU.
•
When SIZE is set to W or the minus value is increased on H-POSI, the monitor
screen may get darker according to the monitor connected. However, the image
will be printed correctly.
Printed image size of 1 image mode(mm)
(S size)
(L size)
100X75
125X94
94X70
118X89
90X68
113X85
Optional size by user
NOTE
or
[
]
33
Advertisement
Table of Contents
