2 2 2 2 2
WHEN SETTING TO MODE : DIFF, IMAGES :4;
Repeat the following procedure to store the set number of images in memory.
1 1 1 1 1
Press DISPLAY button to display the set condition.
2 2 2 2 2
Press MONITOR button and select the source image ("LIVE" is
displayed on the monitor.) to display the image to be stored.
3 3 3 3 3
Press MEMORY button to store the image to be printed.
•
For normal setting, when the image is stored, the source image (LIVE image) is
displayed after displaying the stored image about 1 second.
4 4 4 4 4
When selecting the position to store the image, press MEMORY
PAGE button to select the memory page.
{
}
[
}
•
Press
,
,
,
•
The image is stored in the selected memory page.
•
The position number where the image can be stored is indicated in green.
2 2 2 2 2
WHEN SETTING TO MODE : SAME, IMAGES : 4;
Only one image will be displayed on the monitor screen.
1 1 1 1 1
Press DISPLAY button to display the set condition.
2 2 2 2 2
Press MONITOR button and select the source image ("LIVE" is
displayed on the monitor.) to display the image to be stored.
3 3 3 3 3
Press MEMORY button to store the image to be printed.
•
Select the just previous character of the page where the image is to be stored.
(Select A to store the image into B, if INCREMENT is set to PAGE)
4 4 4 4 4
When selecting the memorizing page (A, B, C), press MEMORY
PAGE button to select .
•
The position number where the image can be stored is indicated in green.
button to determine the position to store the image.
23