Table of Contents
Advertisement
Digital Video Recorder
The Day box allows you to select the days that the alarm schedule will be active. The choices are: Sun, Mon,
Tue, Wed, Thu, Fri, Sat, M~F, Hol and All.
The Range box allows you to set the time that the alarm schedule will be active in 15-minute increments
from 00:00 to 24:00.
The Mode box allows you to set how the alarm reacts during the scheduled time. When set to On, the
Alarm-Out is active during the scheduled time. When set to Event, the Alarm-Out is only active when there
is an Event during the scheduled time.
The Alarm-Out box allows you to set which alarm outputs will be active. You can also select the DVR's
internal buzzer.
The
box allows you to delete an alarm output schedule. You will be asked to confirm whether or not
you really wish to delete the schedule.
You can save your Alarm-Out changes by highlighting Save and pressing the
button. Selecting Cancel
exits the screen without saving the changes.
Remote Control Settings (DEVICE Remote Control Tab)
The Remote Control setup screen allows you to select a port and make correct settings for a remote keyboard.
Figure 31 ─ Remote Control setup screen.
Highlight the box beside Port and select from None, RS232 and RS485. If the RS232 port and RS485 port
are in use for PTZ control, networking or text input, the remote keyboard cannot be configured.
Highlight Setup... and select the correct Baud Rate, Parity, Data Bits and Stop Bits for the device you are
connecting to the DVR.
Highlight the box beside Remote Control Product and select the device from the list.
You can save your Remote Control settings by highlighting Save and pressing the
button. Selecting
Cancel exits the screen without saving the changes.
39
Advertisement
Table of Contents
