Advertisement
Circular guide (optional accessory)
Use
of
the circular guide insures clean,
smooth cutting
of
circles under 200 mm
(7-7/8")
in radius. Insert the pin through the
center hole and secure it with the threaded
knob. Move the base of the tool fully for-
ward. Then install the circular guide on the
base in the same manner, as the guide rule
(rip fence).
Plastic
Cover and
Vacuum head (optional accessory)
The vacuum head is recommended to per-
form clean cutting operations. Install the
plastic cover on the tool by fitting it into the
notches in the tool.
Threaded
knob
c---
Fit into notches
Base
Plastic cover
L l
To attach the vacuum head on the tool, insert the hooks of the vacuum head into the
holes in the base. The vacuum head can be installed on either left or right side of the base.
Then connect a Makita vacuum cleaner to the vacuum head.
Base
1
Vacuum
head
.,a
12
Advertisement
