Advertisement
Anti-splintering device
To
reduce the potential for workpiece sur-
face splintering, the anti-splintering device
can be used. Fit it into the base from below
so that it surrounds the sides of the blade.
-
Plastic base plate (optional accessory)
Use the plastic base plate when cutting
decorative veneers, plastics, etc. It protects
sensitive or delicate surfaces from damage.
To replace the base plate, remove the four
screws with the hex wrench.
Guide rule (rip fence; optional accessory)
When cutting widths of under 150 mm
(5-29/32") repeatedly, use of the guide rule
will assure fast, clean, straight cuts. To
install it, loosen the bolt on the front of the
base. Slip in the guide rule and secure the
bolt.
I
I
I
11
Advertisement
