Makita 4334D Instruction Manual page 14

2
1. Blade holder
2. Clamp
1
2
(5)
1. Blade holder
2. Clamp
(4)
1
2
1. Blade holder
2. Clamp
14
3. Rotate the blade installing lever in the (4) direction until it stops. The
002993
clamp will protrude from the blade holder.
1
4. Remove the clamp from the blade holder while rotating the clamp in the
002781
(5) direction.
Installing clamp
002782
1. Make sure that the blade installing lever has been rotated in the (4) direc-
tion until it stops.
2. Insert the clamp into the blade holder while rotating it in the (6) direction
002783
one quarter to one full turn so that its slot will face forward.
CAUTION:
• Do not rotate the clamp more than one full turn when inserting in into the
blade holder. If you do so, the blade may not be tightened firmly.
(6)