Automatically Correct The Clock Using Gps Function - Panasonic Lumix DMC-FT3 Operating Instructions Manual

Automatically correct the clock using GPS function

Clock of the camera is automatically corrected to the time of the current location utilising
the date and time information received from the GPS satellites. The clock is automatically
set to local time when you travel to countries or regions with a time difference and the
positioning is successful.
Select [Auto Clock Set]
Press 3/4 to select [ON], and then press [MENU/SET].
Perform procedures from step
(P27) (first time only).
Note
•
When [Auto Clock Set] is set to [ON], [World Time]
•
The date and time corrected with [Auto Clock Set] are not as accurate as the radio clock. If it
cannot correct accurately, reset the clock using [Clock Set].
Recording
(P46) from the [Setup] menu.
6
of Setting Date/Time (Clock Set)
"
(P96)
- 89 -
(P44)
is set to [Destination] automatically.
"