Inserting And Removing The Card (Optional)/The Battery - Panasonic Lumix DMC-FT3 Operating Instructions Manual

Inserting and Removing the Card (optional)/the
Battery
•
Check that this unit is turned off.
•
Confirm that there is no foreign object.
•
We recommend using a Panasonic card.
1:Slide the [LOCK] switch B, and release
the lock.
2:Slide the release lever A and open the
side door.
•
Always use genuine Panasonic batteries.
•
If you use other batteries, we cannot guarantee
the quality of this product.
Battery: Being careful about the battery
orientation, insert all the way until you hear
a locking sound and then check that it is
locked by lever C. Pull the lever C in the
direction of the arrow to remove the
battery.
Card: Push it securely all the way until you
hear a "click" while being careful about the
direction in which you insert it. To remove
the card, push the card until it clicks, then
pull the card out upright.
D: Do not touch the connection terminals of the card.
Close the side door until it clicks, and then
lock the [LOCK] switch by sliding it toward
[1].
•
Confirm that the red part on the
showing.
Preparation
(P10)
release lever
is not
- 21 -