Makita 3707 Instruction Manual page 11

1
2
1. Screwdriver
2. Brush holder cap
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended for use with your Makita tool specified in this manual. The
use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita service center.
• Straight & groove forming bits
• Edge forming bits
• Laminate trimming bits
• Straight guide assembly
• Trimmer guide assembly
• Trimmer base assembly
(For chamfering with straight bit)
R
Use a screwdriver to remove the brush holder caps. Take out the worn carbon
001999
brushes, insert the new ones and secure the brush holder caps.
To maintain product SAFETY and RELIABILITY, repairs, any other mainte-
nance or adjustment should be performed by Makita Authorized Service Cent-
ers, always using Makita replacement parts.
Trimmer bits
Straight bit
005116
20
20E
8
8E
6
6E
"U"Grooving bit
005117
6
6E
• Trimmer shoe
• Templet guide
• Collet cone 6 mm
• Collet cone 6.35 mm (1/4")
• Wrench 10
• Wrench 17
D A
6
20
1/4"
6
8
1/4"
6
6
1/4"
D A L1
6
6 60
1/4"
006485
mm
L1 L2
50 15
50 18
50 18
006486
mm
L2 R
28 3
11