Edit Mode; Copying Onto A Dvd Recorder Or A Vcr (Dubbing) - Panasonic NV-GS80EB Operating Instructions Manual

LSQT1131_ENG.book 33 ページ ２００７年１月１１日 木曜日 午前９時５分

Edit mode

Copying onto a DVD recorder or a
VCR (Dubbing)
Pictures recorded by the movie camera can be
stored on a DVD-RAM or other such media. Refer
to the instructions for the recorder.
≥Place a recorded cassette in the movie
camera, and an unrecorded DVD-RAM or
cassette in the DVD recorder or VCR.
1
Connect the movie camera and the
recorder.
Connecting with the AV cable
21-pin Adaptor
A / V
≥Connect the movie camera and the recorder
by using the AV cable 1.
≥If your recorder is not equipped with AV Input
Sockets, the 21-pin Adaptor (purchase
separately) is necessary. Consult your dealer.
Edit mode
INTELLIGENT TIMER EJECT
AUDIO A.DUB TIMER REC
AV3 IN L MONO R
CVC
EXT LINK REC/OTR 6 / / 6
[VIDEO IN]
[AUDIO IN]
1
Connecting with the optional DV cable
(Only for equipment with a DV terminal)
S /
2
(L2) (L2)
2
Turn on the movie camera and set to Tape
Playback Mode.
3
Select the input channel on the TV set and
recorder.
4
Move the joystick up to select the [1/;]
icon to start playback. (Player)
≥The image and sound are reproduced.
5
Start recording. (Recorder)
6
Stop recording. (Recorder)
7
Move the joystick down to select the [∫]
icon to stop playback. (Player)
≥If you record (dub) images onto another video
device and then play them back on a wide-
screen TV, the images may be stretched
vertically. In this case, refer to the operating
instructions for the device that you are recording
(dubbing) to or read the operating instructions
for the TV and set to 16:9 (full).
≥For more information, refer to the operating
instructions for your TV set and recorder.
≥When you do not need functional indications or
date and time indication, respectively set
[SETUP] >> [DISPLAY] >> [OFF] or set [BASIC]
>> [DATE/TIME] >> [OFF] in the Tape Playback
Mode.
(When you connect the movie camera and a
recorder with the DV cable, these indications
may not appear.)
ª When neither image nor sound from
the movie camera is output to the TV
set
≥Check that the plugs are inserted as far as they
go.
≥Check the [12bit AUDIO] settings. (
≥Check the connected terminal.
)
-38-
33
LSQT1131