Menus Related To Taking Pictures; Menus Related To Playback - Panasonic NV-GS80EB Operating Instructions Manual

LSQT1131_ENG.book 38 ページ ２００７年１月１１日 木曜日 午前９時５分

Menus related to taking pictures

ª
[DATE/TIME]
This switches between date and time indications.
≥The movie camera automatically records the
date and time of picture taking on the tape.
ª
[AUDIO REC]
Switches the audio (PCM audio) recording
systems.
[12bit]: Records audio in "12 bit 32 kHz 4 tracks".
(The original audio signals can be kept
after the other audio signals are dubbed.)
[16bit]: Records audio in "16 bit 48 kHz 2 tracks".
Audio can be recorded in higher quality.
(If audio signals are dubbed, then the
original audio signals will be erased.)
≥Audio dubbing cannot be performed on this unit.
If you want to edit the sound on a model with an
audio dubbing function, set [12bit] to take
pictures.
ª [DISPLAY]
Set to [ON] and the display mode can be switched
to all functions. Set to [OFF] and it can be
switched to minimum display.
ª
[BEEP SOUND]
Set to [ON] and confirmation/alarm beeps are
issued as follows.
1 Beep
≥When you start recording
≥When you turn on the power
≥
When the unit goes from quick start standby
mode to recording pause
2 Beeps
≥When you pause recording
≥When you turn off the power
≥When the unit goes into quick start standby
mode
2 Beeps for 4 times
≥When a cassette with its erasure prevention tab
set to [SAVE] is inserted, condensation occurs
( ), and at other times. Check the sentence
-44-
displayed on the screen. (
38
LSQT1131
Menu
ª
[OFF]:
[5 MINUTES]: When about 5 minutes passed
≥In the following cases, the power may not turn

Menus related to playback

ª
If you want to edit the sound on a model with an
audio dubbing function, set [12bit] to take
pictures.
You can switch the sound (PCM Audio) when
playing back a tape with sound recorded in
[12bit].
[ST1]: It only plays back the original sound
[ST2]: It only plays back the sound on the tape
[MIX]: It simultaneously plays back both [ST1]
≥Audio dubbing cannot be performed on this unit.
)
-40-
ª
This switches the sound to be played back.
[STEREO]: Stereo sound (main sound and sub
[L]:
[R]:
[POWER SAVE]
When about 5 minutes passed
without any operation, the standby
mode automatically will be set. In
the standby mode, [;] blinks and
it takes time more than usual to
start recording after you press the
recording start/stop button.
without any operation, the movie
camera automatically turns off to
protect the tape or to prevent the
battery from running down. When
you use the movie camera, turn it
on again.
off even when set [POWER SAVE] >>
[5 MINUTES].
≥When connecting to the AC outlet
(When using the AC adapter)
≥When connecting the USB cable or the DV
cable to a personal computer or other
equipment
[12bit AUDIO]
recorded.
added with audio dubbing.
and [ST2] sounds.
When playing back a tape recorded on this unit,
you will not be able to hear the sound if [ST2] is
set. Set [ST1].
[AUDIO OUT]
sound)
Left channel sound (main sound)
Right channel sound (sub sound)