Displaying Pc Screen On Tv - Panasonic TX-26LX600P Operating Instructions Manual

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC (p. 30)
PC menu setting (changed as desired)
•
Making settings "How to Use Menu Functions"
Menu Item
Viewing mode, Contrast, Brightness, Sharpness, Colour balance (p. 16)
R-Gain
G-Gain
Advanced
setting
B-Gain
Gamma
Input
resolution
Clock
H-pos
PC
setup
V-pos
Clock phase
Sync
Control with HDMI, Volume correction, OSD language (p. 16)
•
Sound menu (p. 16)
Select the external input
1
Select "PC"
2
(To next page)
blue
Press twice
yellow
To return to TV
Adjustments / Confi gurations (options)
Adjusts the white balance for red areas
Adjusts the white balance for green areas
Adjusts the white balance for blue areas
(2.0 / 2.2 / 2.5)
Switches to a wide view
•
VGA (640 x 480 dots), WVGA (852 x 480 dots),
XGA (1,024 x 768 dots), WXGA (1,366 x 768 dots)
•
Options change depending on signals
Set to the minimum level if noise occurs
Adjust horizontal position
Adjust vertical position
Eliminate fl icker and distortion
•
Adjust after Clock adjustment
Chooses another synchronous signal if the image is distorted (H&V / On G)
•
H&V : by the horizontal and vertical signals from your PC
On G : by the green signal from your PC (if available)
Displays PC screen
to (p. 16)
•
Set to the minimum level if noise occurs
•
Corresponding signals
(p. 34)
•
If "H-freq." or "V-freq."
is shown in red, the
signals may not be
supported.
21