Recording A Programme On Sd Card - Panasonic TX-26LX600P Operating Instructions Manual

Recording a Programme on SD Card

The TV channels and AV1 input signals (PAL / SECAM) can be recorded on the SD card. During
recording, it is possible to watch other terminals input signal.
TV
This product is licensed under the MPEG-4 patent portfolio license for the personal and non-commercial
use of a consumer to (i) encode video in compliance with the MPEG-4 Video Standard ("MPEG-4 Video")
and/or (ii) decode MPEG-4 Video that was encoded by a consumer engaged in a personal and non-
commercial activity and/or was obtained from a licensed video provider. No license is granted or implied
for any other use. Additional information may be obtained from MPEG LA. See http://www.mpegla.com.
24
1
Insert the SD Card
While watching a programme
2
Should such a message appear
Start recording?
Current setting
Rec time
Rec mode
Recordable at
To stop
3
Note
•
You cannot record the copy protected signals.
•
If the Off timer function is activated or press the Standby On / Off button on the
remote control during recording, the recording will not stop.
•
Do not press the MAINS power On / Off switch on the TV during recording.
Otherwise the fi le will be broken.
•
Do not remove the SD card while recording. The data being recorded and
other data stored on the SD card may become unreadable.
•
SD recording may not be fully compatible or playable in some PC software or
PDA devices.
•
When two pictures are shown on the same screen as Multi window functions,
the main window is the one that is recorded. The picture can be switched for
the sub window (p. 11).
•
If the signal system is changed during recording, it cannot be recorded
completely.
•
The signals without video (only audio) cannot be recorded completely.
•
For details (p. 35 and p. 38)
(p. 23)
•
Recordable time is displayed if the
recording time is not set. (p. 25)
•
Start recording
•
Cancel
Not enough memory
180min
Economy
15min
(During the confi rmation message appears)
Card capacity is not enough.
•
Continue
( Recording is stopped when
the card capacity is full.)
•
Cancel