Panasonic TX-26LX600P Operating Instructions Manual page 17

Basic picture mode (Dynamic / Normal / Cinema / Auto)
•
Set for each input signal
Adjusts colour, brightness, etc. for each picture mode to suit your taste
Adjusts tint of image
•
For NTSC signal reception only
Chooses the colour balance of the entire image (Cool / Normal / Warm)
Automatically adjusts colours to vivid ones (Off / On)
Automatically reduces unwanted picture noise (Off / Normal / Dynamic / Auto)
•
Not valid on HDMI, PC, and Analogue component signal
Automatically reduces noise for watching DTV, DVD, VCD and SD Card
(Off / Min / Mid / Max)
Automatically makes still pictures and slow pictures look more vivid (Off / On)
•
For PAL or NTSC signal reception only
•
Not valid on RGB, S-Video, components, PC,HDMI and SD Card
Adjusts the output level of deep bass
Adjusts the output level of high-pitch, shrill sound
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Select stereo / monaural (Mono / Stereo)
•
Normally: Stereo
•
Stereo signal cannot be received: Mono
•
M1 / M2: Available while mono signal is transmitted
Improves sound quality for music and dramas (Music / Speech)
®
SRS TruSurround XT creates a high quality surround sound effect using just two
speakers from the source which can output surround encoded signals (Off / On)
•
Switching is also possible by SRS button on the remote control
Chooses according to the signal when HDMI is connected
(Auto / Digital / Analogue) (p. 33)
•
HDMI2 terminal is for digital signal only
Chooses the connector to which a Q-Link compatible equipment is connected
(Off / AV2 / AV3) (p. 30)
Chooses the signal to be transmitted from the TV to Q-Link
(TV / AV1 / AV2 / AV3 / AV4 / Monitor)
•
Monitor: Image displayed on screen
•
Component, PC and HDMI signals cannot be outputted
Control with HDMI function (Off / On) (p. 27)
Teletext display mode (FLOF / List) (p. 14)
Sets the time the TV automatically turns Off. (Off / 15 / 30 / 45 / 60 / 75 / 90) (minutes)
Selects teletext language (West / East1 / East2)
•
West: English, French, German, Greek, Italian, Spanish, Swedish, Turkish
•
East1: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian
•
East2: Czech, Hungarian, Lettish, Polish, Rumanian
Edits channels (p. 18)
Sets channels automatically (p. 20)
Sets channels manually (p. 20)
Fine tuning of channels (during rain, etc.)
Selects optional colour system depending on video signals
(Auto / PAL / SECAM / M.NTSC)
Adjusts volume of individual stations
Set "On" when the decoder is connected to AV2 or AV3 terminal via a Q-Link equipment
(Off / On)
Changes language for on-screen displays
Selects optional colour system based on video signals in AV mode
(Auto / PAL / SECAM / M.NTSC / NTSC)
Adjusts volume for AV, PC, HDMI and component mode
•
A different menu will be displayed while PC or SD Card is used.
•
In AV mode, the Sound menu and Setup menu give a smaller number of options.
Adjustments / Confi gurations (alternatives)
Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour balance
Colour management
P-NR
MPEG NR
3D-COMB
Bass
Treble
Balance
Headphone volume
MPX
Mode
SRS TruSurround XT
HDMI1 input
Q-Link
AV2 out
Control with HDMI
Teletext
Off timer
Text language
Programme edit
Auto setup
Manual tuning
Fine tuning
Colour system
Volume correc.
Decoder (AV2)
OSD language
Colour system
Volume correction
(p. 21 and p. 23)
Dynamic
Normal
On
Auto
Off
On
Stereo
Music
Off
Auto
AV2
TV
On
FLOF
Off
West
Access
Access
Access
Auto
Off
Access
Auto
17