Table of Contents
Advertisement
Troubleshooting Guide
Playback
Issues:
Play fails to start even when [1] (PLAY) is pressed.
Play starts but then stops immediately.
Insert the disc correctly with the label facing up. (
The disc is dirty, scratched or marked. (
You tried to play a blank disc or a disc that is unplayable on
the unit. (
15, 16, 18)
You tried to play a +RW that needs to be finalised on the
equipment used for recording.
You may be able to copy a "One time only recording" title
that was recorded to DVD-RAM using a different Panasonic
DVD Recorder to this unit's HDD, but play is not possible
due to copyright protection.
When recording to DVD-RAM using EP ( 8 hours ) mode,
play may not be possible on DVD players that are
compatible with DVD-RAM. In this case use EP ( 6 hours )
mode. (
80)
If playing DivX VOD content, refer to the homepage where
you purchased it. (DivX) (
Make sure that the TV is turned on. If the menu or
messages are displayed, follow the on-screen instructions.
Audio and video momentarily pause.
This occurs between playlist chapters.
This occurs between chapters and with partially deleted
titles on finalised DVD-R, DVD-R DL, DVD-RW (DVD-Video
format), +R, +R DL and +RW that have been copied using
the high speed mode.
This occurs as scenes change during Quick View (Play
k1.3).
[-R]DL] [+R]DL] When playing a title recorded on both layers,
the unit automatically switches between layers and plays
the title in the same way as a normal programme. However,
video and audio may momentarily cut out when the unit is
switching layers. (
DVD-Video is not played.
Ensure the DVD-Video region number for the disc is
correct, and the disc is not defective. (
You have set a ratings level to limit DVD-Video play.
Change this setting. (
Alternative soundtrack and subtitles cannot be
selected.
The languages are not recorded on the disc.
You may not be able to use the on-screen menus to change
the soundtrack and subtitles on some discs. Use the disc's
menus to make changes. (
No subtitles.
Subtitles are not recorded on the disc.
Turn the subtitles on and select "Text" or the subtitle
number. (
74)
Angle cannot be changed.
This function depends on software availability. Angles can
only be changed during scenes where different angles are
recorded.
You have forgotten your ratings PIN.
With the tray open, press [DRIVE SELECT] to select the
DVD drive, then press and hold [¥ REC] and [1] on the
main unit simultaneously for about 5 or more seconds.
100
VQT2J45
Operation
6)
43)
15)
Cover)
80)
20)
Quick View (Play k1.3) does not work.
This does not work when audio is other than Dolby Digital.
This does not work while recording in XP or FR mode.
89)
The resume play function does not work.
Memorized positions are cancelled when
– press [∫] several times.
– open the disc tray.
– [CD] [VCD] [USB] turn off the unit.
– if a recording or timer recording was executed.
The Video CD picture does not display properly.
When connecting to Multi-system TV, select "NTSC" in "TV
System" in the Setup menu. (
When connecting to PAL TV, the lower part of the picture
cannot be displayed correctly during search.
Time Slip, Manual Skip, etc. does not work.
These functions do not work with finalised discs.
Time Slip does not work when the unit's "TV System"
settings are different from the title recorded on the disc.
(
82)
It takes time before play starts.
This is normal on DivX video. (DivX)
Picture stops.
Picture may stop if the DivX files are greater than 4 GB.
(DivX)
Cannot see the beginning of the title played.
(If connecting to a TV that supports VIERA Link with an
HDMI cable)
When [1] (PLAY) is pressed on this unit's remote control,
you may not be able to see the beginning of the title played
until the picture is displayed on the TV. Using [:], return
to the beginning of the title.
82)
Hide quick links:
Advertisement
Table of Contents
