Adjusting The Playback Picture; Changing Audio During Playback; On-Screen Display Indicators - Panasonic Diga DMR-EX99VEB Operating Instructions Manual

Adjusting the Playback Picture

Manual Tracking
The unit usually makes tracking adjustments
automatically, but you may need to do it manually if noise
appears on a tape recorded on other equipment.
During playback
or
CH CH
Press and hold until the picture noise
disappears.
To return to auto tracking:
(simultaneously).
CH
Tips
To remove the noise from a paused picture:
Start slow-motion ( 40), then adjust the tracking.
Notes
≥This function may not work with some tapes.
≥You can also adjust the tracking with [CH W X] on the main unit.
Vertical Locking Adjustment
Adjust the vertical synchronisation to stop the picture
from shaking while paused.
While paused
or
CH CH
Press and hold until the shaking stops.
To return to the standard position:
(simultaneously).
CH
Notes
≥This function may not work with some tapes.
≥You can also adjust vertical synchronisation with [CH W X] on the
main unit.

Changing Audio during Playback

STTL
Press and hold for about 5 or
more seconds.
The audio changes as follows.
L R (Stereo) L
---------------> --------------------->
^ No display (Normal audio track)

On-screen Display Indicators

STATUS
1 VHS drive indicator
2 L and R indicators
3 Recording mode (
4 Operation status
5 Shows the tape counter and remaining tape time
Notes
Remaining tape time display
≥The displayed time is approximate.
≥The displayed time will be incorrect if you set the wrong tape length in
"Tape Length" in the Setup menu (
quality.
R
to display on-screen indicators.
VHS
The Left (L) and Right (R) indicators show which sound mode is
selected as follows:
L R (Stereo): Hi-Fi stereo audio
L -: Mono L audio of the Hi-Fi stereo audio
- R: Mono R audio of the Hi-Fi stereo audio
- - (Normal): Normal audio
27)
Pressing [STATUS ] to cycle the display as follows:
No display Tape counter
>
^ Remaining tape time
≥Press [DELETE ¢] to reset the tape counter (elapsed time) to
"0:00.00". The tape counter is automatically reset when inserting a
video cassette.
LR SP
0:00.22
83) and if the tape is of poor
41
VQT2J45