Linked Operations With The Tv (Viera Link "Hdavi Control Tm "/Q Link) - Panasonic Diga DMR-EX99VEB Operating Instructions Manual

Linked Operations with the TV (VIERA Link "HDAVI Control
You can enjoy linked operations with the TV and receiver
by using "VIERA Link" or Q Link.
What is VIERA Link "HDAVI Control"? [VIERA]Link]
VIERA Link "HDAVI Control" is a convenient function that offers
linked operations of this unit, and a Panasonic TV (VIERA) or
receiver under "HDAVI Control". You can use this function by
connecting the equipment with the HDMI cable. See the
operating instructions for connected equipment for operational
details.
≥VIERA Link "HDAVI Control", based on the control functions
provided by HDMI which is an industry standard known as HDMI
CEC (Consumer Electronics Control), is a unique function that we
have developed and added. As such, its operation with other
manufacturers' equipment that supports HDMI CEC cannot be
guaranteed.
≥This unit supports "HDAVI Control 5" function.
≥"HDAVI Control 5" is the newest standard (current as of December,
2009) for Panasonic's HDAVI Control compatible equipment.
≥This standard is compatible with Panasonic's conventional HDAVI
equipment.
≥Please refer to individual manuals for other manufacturers'
equipment supporting VIERA Link function.
Preparation:
1 Connect this unit to your TV using an HDMI cable and a fully wired
21-pin Scart cable ( 12), or to your receiver using an HDMI cable
( 88).
2 Set "VIERA Link" to "On" (
3 Set the "HDAVI Control" operations on the connected equipment
(e.g., TV).
≥Set the input channel on VIERA to suit the terminal to be
used as "HDAVI Control".
4 Turn on all "HDAVI Control" compatible equipment and select this
unit's input channel on the connected TV so that the "HDAVI
Control" function works properly.
Also when the connection or settings are changed, repeat
this procedure.
What is Q Link? [Q]Link]
Q Link is a convenient function that offers linked operations of this
unit and a Panasonic TV. You can use this function by connecting the
equipment with a fully wired 21-pin Scart cable.
Preparation:
≥ Connect this unit to your TV with a fully wired 21-pin Scart cable
( 10, 11).
Notes
The following systems from other manufacturers have similar function
to Q Link from Panasonic.
For details, refer to your television's operating instructions or consult
your dealer.
≥Q Link (registered trademark of Panasonic)
≥DATA LOGIC (registered trademark of Metz)
≥Easy Link (registered trademark of Philips)
≥Megalogic (registered trademark of Grundig)
≥SMARTLINK (registered trademark of Sony)
Notes
≥These functions may not work normally depending on the equipment
condition.
≥About "HDAVI Control" function, read the manual of the connected
equipment (e.g., TV) too.
48
VQT2J45
82). (The default setting is "On".)
(When the TV is on) Easy playback
[VIERA]Link] [Q]Link]
When the TV is on and the following operations are
performed, the TV's input will automatically switch to
HDMI input mode ([VIERA]Link]) or AV input mode
([Q]Link]) and the TV displays the corresponding action.
(Picture or sound may not be available for the first few
seconds.)
Press [FUNCTION MENU]
[DIRECT NAVIGATOR], [GUIDE], [PROG/CHECK]
etc.
(When the TV is off) Power on link
[VIERA]Link] [Q]Link]
When the TV is off and the following operations are
performed, the TV will automatically turn on and
displays the corresponding action.
(Picture or sound may not be available for the first few
seconds.)
Press [FUNCTION MENU]
[DIRECT NAVIGATOR], [GUIDE], [PROG/CHECK]
etc.
≥[DVD-V] [CD] [VCD] [VHS] SVCD and MP3/WMA
The TV is automatically turned on when you insert the discs or
VHS.
Power off link
[VIERA]Link] [Q]Link]
When you set the TV to standby mode, the unit is also
automatically set to standby mode. The unit is
automatically set to standby mode even if the
FUNCTION MENU etc. is displayed, during playback or
when the unit is set to a timer recording.
Even if the TV is turned off, the unit will not be turned
off at the same time when recording, copying, finalising
etc.
≥When this unit is connected to an "HDAVI Control" compatible
Panasonic receiver with an HDMI cable, the receiver will also turn
off.
Direct TV Recording
This function allows you to immediately start recording
the programme that you are viewing on the TV.
≥Depending on the TV type connected with this unit, this function
may not work.
Press and hold [¥ DIRECT TV REC] for 1 second.
Recording starts.
To stop recording
Press [∫].
≥The titles are recorded to the HDD.
≥If you switch TV channels while using Direct TV Recording, the
Direct TV Recording may stop.
≥When "EXT-L" lights on the unit's display (
Recording is unavailable.
This button is available only when this unit is on.
§1
When this button is pressed, the playback image is not immediately
§2
displayed on the screen and it may not be possible to watch the
contents from where playback started.
In this case, press [:] or [9] to go back to where playback
started.
This function is available with the TV that supports "HDAVI Control
§3
3" or later.
"/Q Link)
TM
, [1] (PLAY) ,
§1 §2
, [1] (PLAY) ,
§1 §2
[VIERA]Link] §3 [Q]Link]
30), Direct TV