Connection; Basic Connections - Panasonic Diga DMR-PWT420 Operating Instructions Manual

Connection

Basic connections

3D programmes can be played back when this unit is connected to a 3D compatible TV.
• Before connection, turn off all equipment and read the appropriate operating instructions.
BE SURE TO READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3
Cooling fan
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
Household mains socket
(AC 220 to 240 V, 50 Hz)
To connect and register the USB HDD (optional)
Refer to "Registering the external HDD (USB HDD)". (
[PWT520] To connect the Communication Camera (optional)
Refer to "VIERA Connect (Enjoying Internet Service)". (
About HDMI cable
• Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
• When outputting 1080p signal, please use HDMI Cables 5.0 meters or less.
• Recommended Panasonic HDMI cable part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.
To the aerial
Aerial cable
HDMI cable
HDMI
TV's rear panel
60)
66)
Getting started
RF coaxial cable
(supplied)
This unit's rear panel
VHF/UHF
RF IN
VQT4E90
13