Operations While Watching Broadcast - Panasonic Diga DMR-PWT420 Operating Instructions Manual

Watching broadcasts
Watching broadcasts

Operations while watching broadcast

To show subtitle
When "STTL" appears in channel information
( 25)
Press [STTL ].
• Press again to hide subtitle.
Switching audio
When "Multi Audio" appears in channel
information ( 25)
1 Press [OPTION].
2 Select "Multi Audio" in "Digital TV Menu", then
press [OK].
3 Select the desired audio.
• Press [EXIT ] to exit from the screen.
To listen to the Audio Description
Audio Description adds an additional soundtrack
to describe events on screen (narration) and aids
understanding and enjoyment, particularly for
visually-impaired viewers.
When "AD" appears in channel information
( 25)
1 Press [AD].
2 Select "Audio Description" and set to
"Automatic".
3 Select "Volume", then adjust the volume with
[2, 1].
• Audio Description may not be available depending on the
type of audio format.
• When "Dolby D / Dolby D + / Dolby TrueHD", "MPEG" or
"HE-AAC" is set to "Bitstream", the Audio Description may
not work. Set them to "PCM" (
• You can also set "Audio Description" active in the Setup
menu. ( 74)
26
VQT4E90
77, Digital Audio Output).
To show Digital teletext (MHEG)
When "TEXT" appears in channel information
( 25)
1 Press [TEXT ].
2 Use [3, 4, 2, 1], number buttons or colour
buttons, etc. according to on-screen
instructions.
• Some functions of Digital teletext are deactivated during
recording.
• "Freeview Players" applies access control for some MHEG
services. If you have locked viewing of Digital teletext
(MHEG) ( 74, Freeview Players), PIN is required to start
viewing.
Aspect
You can switch the screen mode.
Refer to "Switching the aspect ratio of the
screen". ( 85)