Panasonic Diga DMR-PWT420 Operating Instructions Manual page 79

HDMI Connection
HDMI Video Format
You can only select items compatible with the
connected equipment.
• If "Automatic" is selected, the output
resolution best suited to the connected TV
(1080p, 1080i, 720p or 576p/480p) is
automatically selected.
• To enjoy High Quality Video up-converted to
1080p, you need to connect the unit to
1080p compatible HDTV. If this unit is
connected to an HDTV through other
equipment, it must also be 1080p
compatible.
24p Output
When playing BD-Video recorded in
24 frames, this unit displays each frame at
1/24 second intervals–the same interval
originally shot with the film movie.
• This item is effective only when this unit is
connected to a TV supporting 1080/24p
output and "HDMI Video Format" is set to
"Automatic" or "1080p". (
• When BD-Video images other than 24p are
played, images are output at 60p.
Deep Colour Output
This setting is for selecting whether to use
Deep Colour output when a TV that supports
Deep Colour is connected.
HDMI Audio Output
Select "Off" when connected to an
amplifier/receiver not compatible with HDMI
with a DIGITAL AUDIO OUT terminal.
above)
7.1ch Audio Reformatting
[BD-V]
Surround sound with 6.1 ch or less is
automatically expanded and played back at
7.1 ch.
• If "Off" is selected, sound is played over the
original number of channels. (Note that in
the case of 6.1 ch audio, playback will be at
5.1 ch)
Audio reformatting is enabled in the following
cases:
- When you have selected "PCM" in "Digital
Audio Output". ( 77)
- When the audio is Dolby Digital, Dolby
Digital Plus, Dolby TrueHD or LPCM.
Contents Type Flag
If "Automatic" is selected, the optimal method
of playback depending on the TV (e.g.
cinema) will automatically be selected (only
when the TV supports Contents Type Flag).
VIERA Link
Select "Off" when you do not want to use
"HDAVI Control".
Convenient functions
79
VQT4E90