Timer Recording From Channel Information; To Cancel Recording When Timer Recording Has Already Begun; Notes On Timer Recording - Panasonic Diga DMR-XS400 Operating Instructions Manual

Timer recording
Timer recording from channel
information
You can make timer recording of the current or next
programme.
1
While watching a programme
Press [STATUS
e.g.,
1
NEWS
9:00 - 11:00
Encrypted
2
Display the channel information of a
programme to record.
≥Switch the programme with [2, 1].
≥Switch the channel with [3, 4].
3
Press the "Yellow" button.
4
Go to step 3 on page 33.
≥You cannot change "Channel" and "Day/Date".
To cancel recording when timer
recording has already begun
Press [STOP ∫].
∫ When recording 1 programme
Stop Recording
1
Timer recording of this programme is in progress.
Stop this recording ?
Yes
OK
Select "Yes", then press [OK].
∫ When recording 2 programmes
Stop Recording
2 recordings are in progress.
Which recording would you like to stop ?
1
2
OK
RETURN
1 Select the programme, then press [OK].
2 Select "Yes", then press [OK].
≥ If you have already set a daily/weekly timer recording, the recording will
start at the next scheduled time.
34
VQT3C77
].
10:30 All DVB Channels
Change category
Set timer
Now
Dolby D
No
RETURN

Notes on timer recording

≥When recording except in DR mode, the audio language,
audio content and subtitle language will be selected
according to the following settings:
– "Multi Audio" of "Preferred Language" (
– "Audio for HG / HX / HE / HL / HM Recording" (
– "Subtitles" of "Preferred Language" (
≥When recording except in DR mode, teletext will not be
recorded.
≥(Only when recording broadcast in other than DR mode)
This unit will record in the DR mode once, and then
convert to the selected mode automatically during standby.
If the title has not been decrypted, conversion will start
after decryption.
≥Depending on the state of the unit, playback may stop
when recording begins.
≥Even if you turn the unit off during the timer recording, the
recording is continued.
≥When you programme successive timer recordings to
start, about last 1 minute of earlier programme will not be
recorded.
Programme Programme
Recorded Recorded
Starting the timer recording while executing other
operation ( 100)
About 2 programme simultaneous recording (
80)
83)
80)
Not recorded
30)