Table of Contents
Advertisement
Automatic Standby after OTR
If "On" is selected, this unit is turned to standby mode
when it is not operated for approximately 5 minutes
after completing "Automatic Stop" or "Recording Time"
(
28).
Automatic Standby after Copy
If "On" is selected, this unit is turned to standby mode
when it is not operated for approximately 5 minutes
after completing copy (
DIRECT NAVIGATOR, Copying titles with copying list).
∫ Remote Control
Change the remote control code on the main unit and the
remote control if you place other Panasonic products close
together.
≥Use "DVD 1", the factory set code, under normal
circumstances.
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the number button
([1] to [6]) for more than 5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
≥Operation is possible only with Panasonic remote controls
with "IR6" printed at the bottom when the remote control
code of this unit is set to "DVD 4", "DVD 5" or "DVD 6".
DVD
DVD
IR6
50, Copying to HDD with
IR6
IR6
∫ Clock
If the time is not set correctly, use the settings listed in the
method below.
Clock
Automatic
Time Zone
On
Automatic
Time
Date
0
00
10
1
1
Please set the clock.
OK: access
RETURN: leave
OK
RETURN
≥Automatic
This unit usually obtains time and date information from
digital broadcasts.
But, if the time is not set correctly, set it to "Off" and
perform "Manual setting".
≥Time Zone
When the time is not correct, set "Time Zone".
(GMT -6 to + 6)
≥Manual setting
1 Select "Off" of "Automatic", then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the settings.
≥ When the clock is set manually, you cannot perform
playing/recording/PAUSE LIVE TV/REWIND LIVE TV of the
programmes that are copy protected (Copying is prohibited). (
∫ PIN Entry
You can set/change the PIN. (
2010
78)
13)
87
VQT3C77
Advertisement
Table of Contents
