Time And Day Adjustment; Answering System - Panasonic KX-TCD961EB Operating Instructions Manual

KX-TCD961EB.1(2~22) 99.9.27 7:37 PM
Preparing the Answering System

Time and Day Adjustment

Voice Time/Day Stamp: During playback, a synthesised voice will announce the time and day that
each message was recorded.
1
Press PROG then
2
Press .
" " is displayed on the handset.
" P " is displayed on the base unit.
3
Press 0 .
" " is displayed on the base unit.
"Set time" is announced.
If previously adjusted, the time/day will be
heard.
4
Enter the current time (hour and minute)
using a 4-digit number. (Ex. To set 9:30,
enter "0930".)
The entered number is displayed on the
base unit.
5
Press to select "AM" or "PM".
Press repeatedly to set the day.
The unit announces the day.
6
Press PROG .
The unit announces the time/day.
The clock starts working.
20
Page 20
In step 5, you cannot enter numbers greater
INT .
than 12. Do not use 24 hour clock.
(To set 13:00, enter "0100" and select "PM" by
pressing
The accuracy of the clock is approximately
±45 seconds a month at room temperature.
If a power failure occurs, the adjusted time/day
will be erased.
To check the time/day
1
Press
2
Press
3
Press
.)
PROG then INT .
.
0 .
The current time/day is heard. When
finished, press .
PROG