Tape Operation ( And ) - Panasonic PV-V4622-K Operating Instructions Manual

Tape Operation
detects and marks the beginning and
end points of commercials on your tape for recordings over 15
minutes in length. When
is played back, the VCR a automatically advances through the
commercial segments at high speed. You can also set this feature
to Manual so as to have more control over the advance process.
The effectiveness of this system can vary due to differences in
the way television stations broadcast. See page 28 for answers
to the most commonly asked questions about this feature.
When C/A RECORD: ON, VCR automatically rewinds the
tape after a recording has been made and marks the
beginning and end of any detected commercial blocks.
After marking is done, the tape is returned to the end of
the recording. Commercials are not erased from the tape.
1
VCR C / A CLOCK CH
REPEAT PLAY :OFF
T I ME STAMP :ON
REMOTE WARNING :ON
AUTO SHUT- OFF :OFF
AUTO VCR/TV :ON
IDIOMA/LANGUE : ENGLISH
VCR' S OUTPUT CH :3
SELECT :
EXIT : ACT I ON
2
VCR C / A CLOCK CH
SET UP COMMERCIAL ADV.
C/A RECORD :ON
C/A PLAYBACK :AUTO
SELECT :
EXIT : ACT I ON
3
VCR C / A CLOCK CH
SET UP COMMERCIAL ADV.
C/A RECORD :ON
C/A PLAYBACK :AUTO
SELECT : SET :
EXIT : ACT I ON
ON Timer Recording, VCR Plus+ System, and One Touch recordings are marked automatically.
THE VCR IS WAITING TO
MARK COMMERCIALS IN THE
PROGRAM YOU RECORDED.
MARKING
NOW : PRESS 1
LATER : PRESS 2
CANCEL : PRESS ACTION
OFF The VCR will not mark commercials.
When you are editing or dubbing a tape, or when you do not wish to use this feature,
OFF should be selected.
4
Press ACTION again
to return to normal screen.
26
marked tape
Marking
Press ACTION*
to display menu.
Press
to select C/A and display
SET UP COMMERCIAL
ADV.
Press
• When using the timer to record two
to select C/A RECORD
and press to set.
When STOP is pressed during normal recording, Select One of a)
or b) or c).
a) Press 1 key to mark the recording now.
"NOW MARKING COMMERCIALS" appears.
b) Press 2 key to mark the recording later (after the power has
been turned off).
• If the tape is rewound and another recording started before the
power is turned off, commercials may not be marked correctly.
c) Press ACTION to cancel the marking of this recording.
Ready Checklist
All connections are made.
One time Setup completed.
VCR is plugged in.
TV is turned on and set to CH3, 4
or Video on TV.
SELECT/
SET
:PLAY
:STOP
:FF
:REW
NUMBER
keys
ACTION
Note
adjacent shows on the same
channel, better accuracy can be
obtained by programming each
show separately.