Table of Contents
Advertisement
FLANGE-BACK ADJUSTMENT
1. Loosen the screws on the Flange-back Adjusting
Ring.
2. Turn the Flange-back Adjusting Ring to the
desired position.
Caution: Do not turn this ring excessively counter-
clockwise as this could damage the inner
glass and CCD image sensor.
3. Tighten the screw on the Flange-back Adjusting
Ring carefully (less than 0.5kg. cm of torque.)
Flange-back Adjusting Ring
INSTALLATION OF CAMERA
The mounting bracket can be fixed either on the top or
bottom cover of the camera.
• Mounting from the top
Remove the mount adapter from the bottom of the
camera as shown. The hole is for the standard
photographic pan-head screw size (1/4" - 20).
Make sure that two original screws are used when
mounting the mount adapter; longer type screws
may damage the inner components.
-15-
Fixing Screws
Mount Adapter
Advertisement
Table of Contents
