Table of Contents
Advertisement
For lenses other than those listed on pages 9, 10, 11,
12 and 13, use a C-mount or CS-mount and make sure
that the lens weight is less than 450g (0.99 lbs.). If not,
both the lens and camera should be secured.
The protrusion of the rear of the lens should be as
shown below.
C-mount : Less than 11.5 mm (7/16")
CS-mount : Less than 7.2 mm (1/4")
Caution: To use the C-mount lens, attach the Lens
Mount Converter (C-mount adapter) WV-AD20 to
the camera.
2. Mounting the Lens
Caution:
Always turn the Flange-back Adjusting Ring clock-
wise by loosening the screws on the ring before
mounting the lens. Otherwise the inner glass and
CCD image sensor could be damaged by the
lens.
(1) Mount the lens by turning it clockwise onto the
lens mount of the camera.
(2) Connect the lens cable to the Auto Iris Lens
Connector on the camera when the Auto Iris Lens
is used.
-14-
Advertisement
Table of Contents
